VT 3000-3X-ES-E61-A204-U169 by Bosch Rexroth Indramat
Get a Quote for VT 3000-3X-ES-E61-A204-U169
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The VT 3000-3X-ES-E61-A204-U169 is an analog amplifier card built by Bosch Rexroth Indramat for the VT 3000 Analog Amplifiers series. Installed in hydraulic drive cabinets, the card converts low-level command voltages from a PLC into proportional current for pilot-operated solenoids, letting machine controllers regulate valve position and flow without manual trimming. Its Eurocard footprint fits into 19-inch racks alongside other motion modules, providing an accessible arrangement for installation and maintenance.
The module runs from a nominal supply of 24 VDC (+60%/-5%). Operation ceases below the 22 VDC lower threshold, while protective circuitry tolerates surges up to 39 VDC. Under steady load, the electronics draw less than 1 A, reducing the demand on power rails that serve multiple axes. Incoming command signals arrive on channels 1 through 4 at ±9 V and on a fifth channel at ±6 V. A differential input stage with an impedance of 100 k? prevents these references from being affected by excessive loading. An internal bias current of 20 mA with a tolerance of ±25% centers the output stage around zero. The solenoid circuit supports a 19.5 ? coil and is routed through a 32-pin DIN 41612 Form D connector mounted on the card edge. The board uses a standard 100 × 160 mm Eurocard format and has a mass of 0.13 kg, making it easy to handle during rack installation.
A carrier pulse of 170 Hz with a tolerance of ±10% modulates the output to a maximum solenoid current of 800 mA, producing smooth hydraulic actuation without audible chatter. Overall apparent power consumption is less than 50 VA, which helps limit heat generation in densely populated enclosures. The board uses a 2.5 A slow-blow fuse on the supply feed for branch protection. The fuse coordinates with the supply limits to protect circuit traces during an overcurrent condition, while the card shares backplane power with other amplifier stages.
Technical Specifications
Biasing Current
20 mA (±25%)
Card Size
100 x 160 mm
Command Input 1 To 4
±9 V
Command Input 5
±6 V
Connection Type
32-pin strip, DIN 41612 Form D
Current Consumption
<1 A
Differential Input Impedance
100 k?
Fuse Rating
2.5 A slow
Lower Voltage Limit
22 VDC
Operating Voltage
24 VDC (+60%/-5%)
Power Consumption
<50 VA
Pulse Frequency
170 Hz (±10%)
Solenoid Current
800 mA
Solenoid Resistance
19.5 ?
Upper Voltage Limit
39 VDC
Weight
0.13 kg
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







