RKL4327 by Bosch Rexroth Indramat
Get a Quote for RKL4327
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The RKL4327 cable is a flexible motor power lead produced by Bosch Rexroth Indramat within the RKL Motor Power Cables series. It transfers drive output to a servo motor while also carrying low-current control pairs, so it serves as a combined connection between a controller and a moving axis in industrial automation. Its construction is intended for continuously moving drag-chain routes found on gantries, pick-and-place units, and linear stages where long service life and predictable electrical behavior are required.
Chain duty endurance is rated at 5,000,000 bending cycles, indicating that the jacket and conductors can flex that many times without fatigue. During motion, the minimum bend radius must remain wider than 7.5 × D, and when the machine is idle, the cable may rest at a tighter 5 × D curve. An overall diameter of 17.0 mm sets the size for strain-relief clamps and energy-chain shelves. The conductor set uses four 4.0 mm² power cores, two 1.0 mm² leads, and two 1.5 mm² leads, providing the power wire size needed for medium-frame servo motors. This arrangement helps limit loop resistance in the main cores, while the smaller leads handle sensor or brake functions. The bundle's DC resistance is held to 4.95 ?/km for the power group, supporting voltage stability over long runs. The cable ships from the factory in bulk form as INK0603 for cut-to-length processing.
Capacitive coupling between phases is controlled by a line-to-shield value of 0.8 nF/m, which helps reduce drive-induced common-mode noise. A matte, adhesion-free sheath made of PUR (adhesion-free, matte) resists oil and weld spatter, and it is colored orange for quick identification in control cabinets. At the motor end, a keyed RLS1301/C06 connector mates directly to Rexroth MSK and MKE servos. The control-cabinet side terminates with a compact RLS0722/K04 plug that latches into IndraDrive power modules. This connector arrangement supports secure routing between the cabinet and the motor in moving-axis applications.
Technical Specifications
Bending Cycles
5,000,000
Bulk Cable
INK0603
Conductor Composition
4x4.0 + 2x1.0 + 2x1.5 mm²
Conductor Resistance (20°c)
4.95 Ohm/km
Control Wire 5-6 Size
1.0 mm²
Control Wire 7-8 Size
1.5 mm²
Controller Connector
RLS0722/K04
Discharge Capacity
0.8 nF/m
Dynamic Bending Radius
7.5 x D
Jacket Color
Orange (RAL 2003)
Jacket Material
PUR (adhesion-free, matte)
Motor Connector
RLS1301/C06
Outer Diameter
17.0 mm
Power Wire Size
4.0 mm²
Static Bending Radius
5 x D
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







