RKG0062 by Bosch Rexroth Indramat

The RKG0062 is an encoder cable manufactured by Bosch Rexroth Indramat for the RKG Encoder Cables series. It links a motor-mounted feedback device to a drive controller so position signals can be transmitted reliably in closed-loop motion systems. Because the assembly is supplied with factory-installed connectors, it can be routed directly into automated equipment without extra termination work at the machine. This helps keep installation clean in cabinets and on moving axes where consistent signal transmission is important for repeatable motion control.

The cable is rated for 5,000,000 bending cycles, making it suitable for applications with frequent flexing in cable carriers and similar moving layouts. During motion, the cable requires a minimum bending radius of 7.5xD to reduce mechanical stress on the conductors and jacket. For stationary routing, the minimum bending radius is 5xD, which allows tighter placement after the cable is fixed in position. The drive side uses a pre-fitted RGS1781 connector, while the encoder side uses an RGS0010 plug. This connector pairing supports direct connection to compatible Rexroth feedback hardware and avoids on-site connector assembly that could affect signal consistency.

The operating temperature range extends down to -40 °C, and the upper limit is 80 °C for operating and storage conditions. That range allows the cable to remain in service in cold industrial spaces as well as warmer enclosed installations without placing unusual demands on routing materials. The product is listed as a Basic version, indicating a standard build rather than a specialized configuration. It is also supplied as a Ready-Made assembly, so the cable arrives cut to length with both ends already prepared for installation. This format is useful where a preassembled feedback cable is preferred over loose bulk cable and separate connector parts.