MKD090B-058-KP0-KN by Bosch Rexroth Indramat
Get a Quote for MKD090B-058-KP0-KN
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The MKD090B-058-KP0-KN belongs to the MKD Synchronous Motors series produced by Bosch Rexroth Indramat. It is a servo motor intended for closed-loop positioning and velocity control in automated machinery where rapid response and precise repeatability are necessary. Typical applications include packaging lines, transfer stations, and material-handling units. The motor is supplied without a holding brake, so an external mechanical lock or another suitable holding method is required when a stationary load must remain secured after power is removed.
This motor supplies a continuous standstill torque of 12.0 Nm, allowing it to hold a static load under the specified thermal conditions. A flange dimension of 140 mm accommodates compatible gearboxes and provides a rigid mounting interface. Power and feedback conductors exit on Side B, allowing cables to be routed away from nearby machine components when the motor is installed in the corresponding orientation. The housing has an IP65 protection rating, which prevents dust from entering and protects the internal components against low-pressure water jets. Motion feedback is provided by resolver feedback with an integrated encoder. This arrangement supplies absolute position information across more than 4,096 revolutions and supports a system accuracy of ±8 angular minutes, helping the controller maintain precise position and velocity loops during repeated movements.
A centering pilot measuring 110 mm supports concentric alignment between the motor shaft and the driven equipment. Output torque is transmitted through a shaft with a keyway, providing positive engagement with a pulley, gearbox, or rigid coupling. A radial shaft seal helps retain lubricant in the bearing area and limits the entry of contaminants around the rotating interface. The windings use class F insulation, which permits winding temperatures up to 155 °C before the applicable thermal limit is reached. The motor can operate at ambient temperatures from 0 to 40 °C without derating. Its absolute position capability allows the control system to retain machine position across power cycles, reducing the need for a separate homing movement when operation resumes.
Technical Specifications
Centering diameter
110 mm
Connection Direction
Side B
Connection Type
Connection box
Continuous Torque at Standstill
12.0 Nm
Encoder Type
Resolver feedback w/ integrated encoder
Flange size
140 mm
Holding Brake
Without holding brake
Insulation class
F
Motor Length
B
Motor Size
090
Permissible ambient temperature
0-40°C
Position Detection
Absolute (>4096 revs)
Product type
Servo Motor
Protection category
IP65
Shaft Design
Shaft with keyway
Shaft Seal
Yes
System precision
±8 angular minutes
Winding Code
058
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







