MHD112D-027-PP0-BN by Bosch Rexroth Indramat
Get a Quote for MHD112D-027-PP0-BN
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The MHD112D-027-PP0-BN is a servo motor produced by Bosch Rexroth Indramat for the MHD Synchronous Motors series. As a torque-generating element in CNC machines and automated handling axes, it uses a keyed shaft to transmit motion and relies on natural convection through its housing to remove heat. Digital servo feedback with an integrated encoder provides absolute position data to the drive, allowing precise closed-loop control of speed and angle in industrial automation tasks.
The motor can deliver a continuous standstill torque of 48.0 Nm, giving machinery predictable holding and low-speed driving capability. A centering diameter of 130 mm aligns the frame with adjoining mechanical hardware, while the flange measures 192 mm across to match standard mounting patterns. The enclosure has an IP65 protection rating, so dust and low-pressure water jets do not affect internal components. Operation is permitted from 0 to 40 °C, enabling use inside typical factory enclosures without additional climate control. Power is fed through a connector that exits on side B, allowing flexible cable routing when the motor is installed inside compact machine frames. The unit has a size 112 frame with length code D. Winding code 027 identifies its electrical characteristics.
Position accuracy is maintained within ±0.5 angular minutes with the aid of optical measurement inside the feedback system. Its absolute scale provides position tracking over more than 4096 revolutions without requiring a homing cycle. Installation is permitted at elevations up to 1000 m above mean sea level, and Class F insulation tolerates winding temperatures associated with demanding duty cycles. A shaft seal protects the bearings from contaminants, but the motor does not include a holding brake, so an external mechanism or drive-generated torque is required to retain a load when power is removed. The permitted storage temperature ranges from -20 °C to +80 °C, supporting storage in a wide range of indoor industrial locations before installation.
Technical Specifications
Ambient Storage Temperature Range
-20 to +80 °C
Centering diameter
130 mm
Continuous Torque at Standstill
48.0 Nm
Degree of protection
IP65
Encoder Type
Digital servo feedback w/ integrated encoder
Flange size
192 mm
Holding Brake
Without holding brake
Housing Type
Natural convection
Insulation Class
F
Maximum setup height
1000 above MSL
Measurement method
Optically
Motor Length
D
Motor Size
112
Operating Ambient Temperature Range
0 to 40 °C
Power Connection Direction
to side B
Power ConnectionType
Output Connector
Product Type
Servo Motor
Shaft Design
Keyed Shaft
Shaft Seal
Yes
System accuracy
± 0.5 angular minutes
Type of Position Detection
Absolute (>4096 revolutions)
Winding Code
027
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







