MHD112C-024-NP0-BN by Bosch Rexroth Indramat
Get a Quote for MHD112C-024-NP0-BN
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The MHD112C-024-NP0-BN servo motor is produced by Bosch Rexroth Indramat within the MHD Synchronous Motors series. Winding code 024 sets the motor's electromagnetic characteristics, while the 112 frame integrates easily into standardized machine mounts. Used in automated tooling and transfer systems, the unit transforms controlled current from a drive into precise closed-loop motion.
Its continuous stall torque reaches 38.0 Nm, supplying holding force for static loads without exceeding thermal limits. An enclosure rating of IP65 protects the motor against dust ingress and water jets, supporting direct installation on machinery. Shaft position is reported through a digital servo feedback (HSF) encoder that transmits high-resolution optical data to the drive. The square mounting face measures 192 mm, and a centering diameter of 130 mm aligns the rotor concentrically with couplings. Heat generated in the stator dissipates through natural convection, so no external fan or liquid cooling circuit is required. The winding provides a resistance and inductance balance suitable for 300 V drives. Class F insulation tolerates winding temperatures up to 155 °C, and the motor can be installed at elevations up to 1,000 m above mean sea level without output reduction.
The motor can be stored at temperatures from -20 to +80 °C and operated at ambient temperatures from 0 to 40 °C without derating. Its positional accuracy is rated at ±0.5 angular minutes through optical measurement and relative position evaluation. A keyed shaft transmits torque to pulleys or gearboxes, while an integral shaft seal helps prevent coolant from entering the motor. Power cabling exits on side B through an output connector, allowing the cable route to follow the machine layout. The motor has length code C and is supplied without a holding brake, so an external mechanism or drive-applied torque must secure stationary loads when required.
Technical Specifications
Ambient Storage Temperature Range
-20 to +80 °C
Centering diameter
130 mm
Continuous Torque at Standstill
38.0 Nm
Degree of protection
IP65
Encoder Type
Digital servo feedback (HSF)
Flange size
192 mm
Holding Brake
Without holding brake
Housing Type
Natural convection
Insulation Class
F
Maximum setup height
1000 above MSL
Measurement method
Optically
Motor Length
C
Motor Size
112
Operating Ambient Temperature Range
0 to 40 °C
Power Connection Direction
to side B
Power ConnectionType
Output Connector
Product Type
Servo Motor
Shaft Design
Keyed Shaft
Shaft Seal
Yes
System accuracy
± 0.5 angular minutes
Type of Position Detection
Relative
Winding Code
024
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







