MHD093C-058-PG0 by Bosch Rexroth Indramat

Rated 4.9 stars (17 reviews)

Get a Quote for MHD093C-058-PG0

Request a quote or call us now at 1-888-551-3082!

In-Stock, Ships 3-5 Days

We respect your privacy. Your information is safe and will never be shared.

Secure Online
Checkout

Free Ground
Shipping

One Year
Warranty

The MHD093C-058-PG0 is a servo motor produced by Bosch Rexroth Indramat within the MHD Synchronous Motors series. It converts current from a drive controller into controlled rotary motion for positioning and speed-control tasks in automated handling systems, packaging lines, and CNC axes. A digital feedback unit built into the housing returns precise rotor data, supporting closed-loop regulation of torque and velocity.

During operation, the motor delivers a continuous standstill torque of 23.0 Nm, allowing it to hold substantial loads at zero speed. Its housing is rated IP65, so the internal windings are protected against dust and low-pressure water jets. The mechanical interface has a 130 mm centering diameter that aligns the frame with the machine plate. A 140 / 150 mm square flange accommodates the mounting bolts. The motor can operate at ambient temperatures from 0 to 40 °C, while Class F insulation withstands elevated winding temperatures. The plain shaft extends from the flange without a key, and a shaft seal helps prevent lubricant migration and contaminant entry. Because the motor is supplied without a holding brake, an external clamping device must secure the load when power is removed.

The motor can be stored at temperatures from -20 to +80 °C and installed at elevations up to 1,000 m above mean sea level without derating. Its feedback system uses an optical measurement method with absolute tracking across more than 4,096 revolutions. The system provides an accuracy of ±0.5 angular minutes, and its position reference is absolute across more than 4,096 revolutions. Winding code 058 identifies the torque-current gradient and resistance values used by this model. Motor size 093 establishes the frame dimensions, while length code C indicates the active magnetic stack length.

Technical Specifications

Ambient Storage Temperature Range
-20 to +80 °C

Centering diameter
130 mm

Continuous Torque at Standstill
23.0 Nm

Degree of protection
IP65

Encoder Type
Digital servo feedback w/ integrated encoder

Flange size
140 / 150 mm

Holding Brake
Without holding brake

Insulation Class
F

Maximum setup height
1000 above MSL

Measurement method
Optically

Motor Length
C

Motor Size
093

Operating Ambient Temperature Range
0 to 40 °C

Product Type
Servo Motor

Shaft Design
Plain shaft

Shaft Seal
Yes

System accuracy
± 0.5 angular minutes

Type of Position Detection
Absolute (>4096 revolutions)

Winding Code
058

Click here for product datasheet

Contact Us

1620 Old Apex Road, Cary, NC 27513, USA

Toll Free: 1-888-551-3082

International: 1-919-443-0207

Fax: 1-919-867-6204

Email: sales@wakeindustrial.com

Shipping Options

DHLFedExUPSFreight

Payment Methods

American ExpressMasterCardVisaWire Transfer

Need Assistance?

Our team is here to help you find the right part for your needs.

Worldwide Shipping with FedEx and UPS.

We accept all major credit cards

1 year Automation Factory warranty on ALL products