MHD093C-058-NP0-BA by Bosch Rexroth Indramat

Rated 4.9 stars (20 reviews)

Get a Quote for MHD093C-058-NP0-BA

Request a quote or call us now at 1-888-551-3082!

In-Stock, Ships 3-5 Days

We respect your privacy. Your information is safe and will never be shared.

Secure Online
Checkout

Free Ground
Shipping

One Year
Warranty

Bosch Rexroth Indramat manufactures the MHD093C-058-NP0-BA for the MHD Synchronous Motors series. This AC-fed servo motor is intended for closed-loop position and speed control in machine tools, packaging lines, and other automated axes. Its size 093 frame with length code C uses a 140/150 mm flange and keyed output shaft, providing a standard mechanical interface, while the relative optical encoder supplies position data to the drive.

The motor supplies a continuous standstill torque of 23.0 Nm, allowing it to hold or start heavy loads without overheating. A 130 mm pilot diameter helps center the motor during installation by aligning the stator with gearbox or bracket bores. The IP65 enclosure protects the windings against dust and low-pressure water jets, permitting the motor to be mounted outside a cabinet. During storage and transport, the motor withstands ambient temperatures from -20 to +80 °C without loss of insulation integrity. Heat generated by the stator is dissipated through natural convection, so no additional fan or liquid cooling circuit is required when airflow around the housing remains unobstructed.

During operation, the motor can run in ambient temperatures from 0 to 40 °C, matching the thermal limits of its Class F insulation and convection cooling. Integrated digital servo feedback (HSF) returns high-resolution rotor-angle data to the drive. Combined with the optical measurement method, the feedback system provides an accuracy of ±0.5 angular minutes for precise contouring routines. Power is transmitted through a keyed shaft, and a shaft seal prevents lubricant from migrating along the journal. The unit is supplied without a holding brake, and its power connector exits on side B to simplify cable routing. The motor can be installed at altitudes up to 1,000 m above mean sea level.

Technical Specifications

Ambient Storage Temperature Range
-20 to +80 °C

Centering diameter
130 mm

Continuous Torque at Standstill
23.0 Nm

Degree of protection
IP65

Encoder Type
Digital servo feedback (HSF)

Flange size
140 / 150 mm

Holding Brake
Without holding brake

Housing Cooling Type
Natural convection

Insulation Class
F

Maximum setup height
1000 above MSL

Measurement method
Optically

Motor Length
C

Motor Size
093

Operating Ambient Temperature Range
0 to 40 °C

Power Connection Direction
to side B

Power ConnectionType
Output Connector

Product Type
Servo Motor

Shaft Design
Keyed Shaft

Shaft Seal
Yes

System accuracy
± 0.5 angular minutes

Type of Position Detection
Relative

Winding Code
058

Click here for product datasheet

Contact Us

1620 Old Apex Road, Cary, NC 27513, USA

Toll Free: 1-888-551-3082

International: 1-919-443-0207

Fax: 1-919-867-6204

Email: sales@wakeindustrial.com

Shipping Options

DHLFedExUPSFreight

Payment Methods

American ExpressMasterCardVisaWire Transfer

Need Assistance?

Our team is here to help you find the right part for your needs.

Worldwide Shipping with FedEx and UPS.

We accept all major credit cards

1 year Automation Factory warranty on ALL products