MHD093C-035-PG2-AN by Bosch Rexroth Indramat
Get a Quote for MHD093C-035-PG2-AN
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The MHD093C-035-PG2-AN is a servo motor manufactured by Bosch Rexroth Indramat within the MHD Synchronous Motors series. Designed for closed-loop positioning and velocity control in automated machinery, the motor converts drive current into controlled mechanical rotation that can be coordinated with PLC motion commands. Its integrated digital feedback system supports precise commutation and removes the need for an external position transducer. The motor is suitable for applications that require repeatable movement, controlled acceleration, and accurate positioning under changing loads.
The motor delivers a continuous standstill torque of 23.0 Nm, providing predictable load capacity when control current holds the shaft stationary. The housing has an ingress protection rating of IP65, protecting internal components against dust and low-pressure water jets. The permitted ambient operating temperature ranges from 0 to 40 °C, while natural-convection cooling removes heat without forced airflow. A flange pitch of 140 / 150 mm and a centering diameter of 130 mm align the frame with compatible machine adapters. The motor uses Class F insulation and winding code 035. Its size is 093 with length code C, and the output connector routes power toward side A. A plain shaft transfers torque to the load, while a shaft seal helps prevent lubricant migration and contaminant entry. Position data is supplied by an optically scanned digital servo encoder integrated into the rear cover.
The built-in holding brake applies 32.0 Nm of static torque to secure vertical or suspended loads when power is removed. Multi-turn feedback provides a system accuracy of ± 0.5 angular minutes and retains absolute position data across more than 4096 revolutions, supporting a quick restart after a power interruption. The permitted storage temperature ranges from -20 to +80 °C, allowing the motor to remain unpowered in a broad range of storage conditions. Installation is permitted at elevations up to 1000 m above mean sea level without derating. The sealed housing, rear-mounted encoder, and side-A power connection support compact installation while keeping the feedback and power interfaces organized.
Technical Specifications
Ambient Storage Temperature Range
-20 to +80 °C
Centering diameter
130 mm
Continuous Torque at Standstill
23.0 Nm
Degree of protection
IP65
Encoder Type
Digital servo feedback w/ integrated encoder
Flange size
140 / 150 mm
Holding Brake
With holding brake
Holding Brake Torque
32.0 Nm
Housing Type
Natural convection
Insulation Class
F
Maximum setup height
1000 above MSL
Measurement method
Optically
Motor Length
C
Motor Size
093
Operating Ambient Temperature Range
0 to 40 °C
Power Connection Direction
to side A
Power Connection Type
Output Connector
Product Type
Servo Motor
Shaft Design
Plain shaft
Shaft Seal
Yes
System accuracy
± 0.5 angular minutes
Type of Position Detection
Absolute (>4096 revolutions)
Winding Code
035
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







