MDD093A-N-030-N2L-110GA0 by Bosch Rexroth Indramat

The MDD093A-N-030-N2L-110GA0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for digital drive controllers, it delivers closed-loop rotary motion that follows commands from compatible Indramat drive amplifiers used on pick-and-place units, gantry axes, and automated tooling. Its electromagnetic components, feedback device, and mechanical frame support dynamic accuracy while limiting the installation space required inside industrial machinery. The compact design also makes the motor suitable for automated systems that require responsive acceleration and repeatable positioning.

The unit operates at a nominal speed of 3000 rpm, providing a suitable velocity range for many positioning and material-handling applications. Its continuous torque at standstill is 9.2 Nm, allowing the motor to hold static loads such as vertical stages without overheating when operated within the permitted thermal limits. A centering diameter of 110 mm provides the locating interface for flange mounting, while standard balancing helps limit vibration that could affect bearings and coupled equipment. Electrical connections are directed toward side A, which allows power and feedback cables to be routed from the corresponding side of the housing. Rotor position and speed information are supplied through digital servo feedback (DSF), enabling the drive controller to regulate motion through a closed control loop. The standard housing and shaft-end configuration match the mounting geometry used by other size-093 motors in the series.

The motor is supplied with no blocking brake, so an external holding device or drive-applied torque is required when a load must remain stationary. Its output interface uses a plain shaft with a shaft seal, allowing direct connection to a clamping coupling while helping protect the output journal from lubricant and contaminants. Frame code 093 indicates the motor's frame size and corresponding stator arrangement. The motor has a length code of A, representing the shortest available stack for this frame size. This short housing can fit machinery with limited axial clearance without requiring changes to the mounting plate.