8LVA13.R0016D200-0 by B & R Automation

The 8LVA13.R0016D200-0 synchronous motor is manufactured by B&R Automation as part of the 8LVA Three Phase Synchronous Motors series. It serves as a servo drive element that converts three-phase electrical energy into rotational motion for packaging stations, gantries, and assembly cells that need precise speed and position control. Integrated feedback and a compact housing allow the motor to operate directly on machine frames where space is limited and response time is critical. This arrangement supports short cable runs and stable axis behavior in machines that cycle rapidly and reverse often.

The motor has a positioning accuracy of 10 angular minutes, which is the maximum deviation between commanded and actual rotor position. Separate encoder and power connections help keep feedback signals clear of inverter noise, while a built-in swiveling double angular connector can rotate to ease cable routing in tight spaces. Cooling is handled by self-cooling, so no external blower is required. Rotor position is measured by a resolver, which provides reliable angle feedback even at zero speed. An integrated brake supplies 0.35 Nm of static torque to hold vertical axes during power loss. The shaft opening is left unsealed, so the motor is better suited for dry areas or for installations with external protection.

This configuration belongs to the 8LV Servo Motor platform and follows the same general mounting and electrical conventions used across related B&R models. Feedback originates from a dedicated RE-15-1-J04 resolver integrated at the stator rear. A smooth shaft simplifies coupling to low-inertia loads, but torque must be transmitted through a clamping hub rather than a keyed connection. The lack of an oil seal limits use in areas where fluid exposure is expected. The size-1 frame keeps mass low for rapid acceleration, and the length-3 construction provides additional active material for sustained output.