8LSA23.R0060D200-0 by B & R Automation

The 8LSA23.R0060D200-0 is a three-phase synchronous servo motor produced by B&R Automation for the 8LS Synchronous Motors series. The motor converts drive current into precise torque so that CNC axes, material-handling systems, and packaging machinery can follow commanded profiles without slip. Because it combines feedback and braking options in a compact frame, the unit serves as a direct mechanical interface between the controller and the driven load in high-cycle automation lines.

Its electromagnetic design uses a three-phase synchronous arrangement that supports sinusoidal commutation across all poles. Under nominal conditions, the rotor reaches a rated speed of 6000 rpm, so connected gearing must accommodate high shaft velocity while maintaining positioning accuracy. The face of the housing follows a 58 mm flange pattern, which helps align the motor with compact gearheads and couplings. The mechanical system is specified with a backlash tolerance of 10 arcmin. Power and signal cables exit through an angled swivel connector, which helps keep the cable bend radius away from adjacent axes. The winding stack uses length code 3 to balance inertia against continuous torque.

Thermal management relies on self-cooling, so ambient air removes heat from the stator without auxiliary fans. The motor is equipped with a standard holding brake to lock motion during power loss or service. A rigid mounting flange carries the load moment, while the smooth shaft mates with clamp or friction couplings because no keyway is provided. Because an oil seal is not present, the motor should be installed outside splash zones or used with external sealing collars. The 8LSA configuration uses standard bearings to keep weight low for dynamic applications, and the resolver layout maintains a consistent encoder pinout.