IP4132-B518-0000 by Beckhoff
Get a Quote for IP4132-B518-0000
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The IP4132-B518-0000 is a remote I/O module manufactured by Beckhoff for the IP Compact Box Units series. Intended for installation directly on a machine, the unit brings protected analog outputs into the field so controllers can operate actuators without additional enclosures. By combining a bus interface, power routing, and a sealed housing, it helps reduce panel space and shorten signal paths in automated equipment.
Its communication layer uses the CANopen fieldbus and an integrated T-connector, allowing the module to be inserted anywhere along the trunk without additional junction hardware. After a telegram is received, the internal circuitry updates the output latches in less than 4 ms, supporting motion sequences that require precise timing. The module provides 4 output channels for small groups of field devices. Each channel uses 16-bit resolution, allowing the controller to transmit finely graduated set values instead of simple on-and-off states. The enclosure carries IP65, IP66, and IP67 ratings, protecting the electronics against dust, water jets, and temporary immersion. The outputs share the 24 V return from the control supply, while the driver stages draw power from a dedicated control-voltage rail.
The actuator side is supplied through the load-voltage rail, designated UP, with a maximum voltage of 30 VDC for common industrial actuators. Output signals are routed to the machine through an M12 screw-in connector that resists loosening under vibration. System power enters through one 4-pin M8 connector and passes unchanged through an M8 socket for cascaded wiring. The module provides more than 5 k? of impedance between each driver and the controller, helping prevent fault currents from feeding back into sensitive electronics. A process image of 4 × 16-bit output data is presented to the PLC for straightforward channel mapping and control. The separate connections for field signals and system power also keep the wiring paths organized when several modules are installed along the same machine section.
Technical Specifications
Actuator Supply
Load Voltage (UP)
Approvals/markings
CE, UL
Bus Connection
Integrated Tee-Connector
Configuration Possibility
through KS2000 or the controller (service data objects)
Conversion Time
< 4 ms
Fieldbus System
CANopen
Ground Reference
Common With 24 VDC Supply
Load
greater than 5 k?
Load Impedance
> 5 k?
Max Load Voltage
30 VDC
Measurement Error/uncertainty
less than ±0.1% (relative to full scale value)
Nominal Voltage
24 V DC
Number Of Channels
4
Operating Temperature
0...55°C
Output Connection
M12 Screw-In
Output Connections
M12, screw type
Output Driver Supply
Control Voltage
Output Voltage Range
±10 V
Power Feed
1 x M8 Connector, 4-Pin
Power Pass-through
1 x M8 Socket, 4-Pin
Process Image
4 x 16-Bit Output Data
Protection Class
IP65, IP66, IP67
Protective Rating
IP65/66/67 (conforms to EN 60529)
Resolution
16 Bit
Signal Current
-10/0...10 V
Storage Temperature
-25...+85°C
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







