EK1960-2608 by Beckhoff
Get a Quote for EK1960-2608
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The EK1960-2608 is a safety-rated EtherCAT coupler produced by Beckhoff in the EK EtherCAT Couplers series. Acting as the head of a modular I/O strand, it links field signals to a higher-level controller while handling distributed safety logic inside the same housing. The unit integrates relay and semiconductor channels so that machines can disconnect power, monitor sensors, and confirm stop conditions through a single node on an industrial Ethernet segment.
The coupler operates from a nominal supply of 24 V DC; this voltage feeds the internal logic, relay coils, and downstream terminals. Up to 500 mA is available on the E-bus, allowing neighboring slices to draw control power without a separate feed. Each of the four relay channels can carry up to 2 A, making them suitable for contactors or lamp loads. Functional safety is implemented with Safety over EtherCAT, so safe process data is encapsulated in the same telegrams that carry standard I/O while retaining SIL 3 integrity. The physical network connection uses an M8 circular socket, which supports pre-molded sensor cables and full-speed signaling. Additional wiring for power and field lines uses push-in terminals and the 1-Wire technique to reduce wiring time. The housing measures 230.5 mm wide, 100 mm high, and 58.6 mm deep, so it fits on a 35 mm DIN rail within shallow control panels.
A total of 20 fail-safe inputs accommodate emergency-stop buttons or light curtains, while 24 fail-safe semiconductor outputs drive valve solenoids or motor contactors under monitored conditions. The relays switch mechanical loads at frequencies up to 20 Hz, helping prevent excessive contact wear in rapid-cycling applications. An IP20 enclosure protects the electronics from finger contact and falling debris when the device is mounted in its required horizontal orientation. The potential-free normally open relay contacts provide electrical separation between the switched field circuits and the control electronics. Push-in connections simplify conductor insertion, while the compact housing helps conserve space in control panels that have limited installation depth.
Technical Specifications
Connection Technology
1-Wire
Depth
58.6 mm
Ethercat Connector
M8
Height
100 mm
Installation Position
Horizontal
Maximum E-bus Supply Current
500 mA
Maximum Output Current Per Channel
2 A
Maximum Relay Switching Frequency
20 Hz
Nominal Supply Voltage
24 V DC
Protection Rating
IP20
Relay Contact Type
Potential-Free NO
Relay Outputs
4
Safe Digital Inputs
20
Safe Digital Outputs
24
Safety Protocol
Safety over EtherCAT
Width
230.5 mm
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







