EK1960-2600 by Beckhoff
Get a Quote for EK1960-2600
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The EK1960-2600 is a safety I/O coupler manufactured by Beckhoff within the EK EtherCAT Couplers series. It combines a standard EtherCAT interface with a localized safety controller, allowing distributed machines to satisfy functional safety requirements without external relays. Verified safety data is communicated through Safety over EtherCAT, and the device consolidates safe digital inputs, transistor outputs, and relay contacts into a single DIN-rail segment for compact machine-level automation.
Its housing has a depth of 58.6 mm, a height of 100 mm, and a width of 230.5 mm, permitting installation in shallow control cabinets. Field wiring is connected through spring-loaded terminals, while the internal E-bus can supply up to 500 mA to adjacent terminals. The control electronics operate from a nominal supply voltage of 24 V DC. With an ingress protection rating of IP20, the unit is intended for clean, ventilated enclosures where protection against accidental finger contact is required. The housing dimensions establish the necessary mounting clearances within the cabinet. Its electrical limits also affect power distribution, heat dissipation, and panel airflow.
Network traffic is routed through a shielded RJ45 port that connects the coupler to the EtherCAT trunk. Each output channel can deliver up to 2 A when no more than half of the outputs are active simultaneously, allowing direct actuation of solenoids and contactors. The integrated relays can switch loads at frequencies up to 20 Hz and use AgNi contacts with a 0.2 µm gold flash to maintain low resistance at signal levels. Safety resources include 20 dedicated digital inputs, 24 digital outputs, and 4 relay outputs, providing enough connection points for emergency stops, guard doors, and light curtain signals without additional slice modules.
Technical Specifications
Depth
58.6 mm
E-bus Supply Current Maximum
500 mA
Height
100 mm
Ingress Protection
IP20
Max. Channel Current (50% Simultaneity)
2 A
Network Connector
RJ45
Nominal Supply Voltage
24 V DC
Relay Make Contact Material
AgNi + 0.2 µm Au
Relay Switching Frequency Maximum
20 Hz
Safe Digital Inputs
20
Safe Digital Outputs
24
Safe Relay Outputs
4
Safety Protocol
Safety over EtherCAT
Terminal Connection
Spring-Loaded
Width
230.5 mm
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







