EK1960-0000 by Beckhoff
Get a Quote for EK1960-0000
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The EK1960-0000 is a safety-oriented EtherCAT coupler produced by Beckhoff within the EK EtherCAT Couplers series. The unit links local terminal blocks to an EtherCAT network and allows a controller to process standard and safety signals through a single fieldbus interface in industrial automation systems. Its enclosure measures 230.5 mm in width, 100 mm in height, and 58.6 mm in depth, mounts horizontally on the DIN rail, and carries an IP20 protection rating for cabinet environments.
Operation begins with a nominal supply of 24 V DC, which powers the internal logic, safety relay circuitry, and attached terminal segment. The upstream interface presents an EtherCAT port with an RJ45 plug, making network wiring identical to standard Ethernet infrastructure. Along the internal E-bus, the coupler supplies up to 500 mA, establishing the power budget for additional terminal slices before an external feeder is required. On the input side, 20 safety-rated one-wire channels can accept switches, sensors, or light grids that require reliable disconnection monitoring. The output section provides 24 safety digital channels; each is monitored for short circuits and wiring faults and can switch loads directly under the real-time control task without sacrificing response time.
System size is scaled by mapping as many as 128 safe connections, allowing the coupler to supervise larger cells without adding separate safety PLCs. Each output can drive up to 2 A, supporting direct energization of contactor coils or low-power brakes while staying within conductor limits. A configurable watchdog reaches 60,000 ms, so installation procedures or slow machine restarts do not inadvertently trigger a safety trip. All diagnostics, cyclic data, and safety telegrams are encapsulated in Safety over EtherCAT, enabling mixed standard and safe traffic on the same cable while maintaining separate data paths at the protocol layer.
Technical Specifications
Connection Technology
1-wire
Depth
58.6 mm
Ethercat Connector
RJ45
Height
100 mm
Installation Position
Horizontal
Maximum E-bus Supply Current
500 mA
Maximum Output Current Per Channel
2 A
Maximum Safe Connections
128
Maximum Watchdog Time
60000 ms
Nominal Supply Voltage
24 V DC
Protection Rating
IP20
Safe Digital Inputs
20
Safe Digital Outputs
24
Safety Protocol
Safety over EtherCAT
Width
230.5 mm
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







