EK1828-0010 by Beckhoff
Get a Quote for EK1828-0010
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The EK1828-0010 is an EtherCAT coupler with digital outputs produced by Beckhoff within the EK EtherCAT Couplers series. The unit links field I/O to an EtherCAT network while providing eight transistor outputs so PLCs can actuate solenoids, relays, or indicator loads directly from the coupler rail. Acting as a compact gateway, it forwards deterministic process data to downstream terminals and simultaneously supplies switching signals to connected 24 VDC devices inside control cabinets.
On the communication side, the coupler uses the EtherCAT Device Protocol at a line speed of 100 MBaud. Two inline ports with two RJ45 sockets form the pass-through bus. With standard Category 5e cabling, the segment length may reach 100 m. Telegram processing adds a typical internal delay of only 1 µs, preserving the microsecond cycle times expected in motion or high-speed packaging machines. The device integrates 8 digital output channels; each channel switches on within 60 µs and releases within 300 µs, allowing repetitive duty cycles without timing uncertainty. The output stage can absorb up to 150 mJ per channel during inductive shutdown. The E-bus backplane supplies up to 1000 mA so that adjacent terminal electronics remain powered without extra wiring.
Each output is designed for a nominal field supply of 24 VDC, and it can continuously source up to 0.5 A to drive valves, contactors, or LED stacks. A shared power contact rated for 10 A allows all channels to draw a higher aggregate current without voltage sag on long feed runs. Galvanic separation between the logic domain and field power is verified at 500 V, protecting the host controller from transients on external wiring. The die-cast housing has an IP20 protection rating, providing finger-safe terminals while requiring installation inside an enclosure.
Technical Specifications
Baud Rate
100 MBaud
Breaking Energy
150 mJ/Channel Max.
Bus Connection
2 x RJ45
Cable Length
100 m Max.
Delay
1 µs Typ.
Digital Outputs
8
E-bus Power Supply
1000 mA Max.
Isolation Voltage
500 V
Output Current Per Channel
0.5 A Max.
Output Voltage
24 VDC
Power Contact Current
10 A Max.
Protection Class
IP20
Protocol
EtherCAT Device Protocol
Switch-off Time
300 µs Typ.
Switch-on Time
60 µs Typ.
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







