EK1828 by Beckhoff
Get a Quote for EK1828
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The EK1828 is an EtherCAT coupler produced by Beckhoff for the EK EtherCAT Couplers series. It mounts at the head of a terminal string and converts high-speed EtherCAT telegrams into the local terminal signal format so that standard I/O slices can be addressed by the PLC. Within an industrial automation cell, this device acts as the communication and power entry point, enabling compact remote stations to handle machine sensing and actuation without separate fieldbus nodes.
The EtherCAT segment operates at a data rate of 100 MBaud, and telegrams enter or leave the coupler through 2 × RJ45 connectors arranged as in-line switch ports. Up to 100 m of Category 5e cable can be routed between stations without repeaters, and the propagation delay through the coupler itself is 1 µs. The head module provides 4 digital inputs, which use a 3 ms filter to suppress contact bounce. Its 8 digital outputs source current to external loads with a guaranteed turn-on time of 60 µs and a turn-off time of 300 µs. Internal logic and connected sensors receive power from a 24 VDC field supply fed through the power contacts on the left side of the housing.
The local terminal backplane, known as the E-bus, can supply up to 1000 mA, allowing additional analog or specialty cards to receive control power without separate wiring. Each output channel is rated for 0.5 A, and stored-energy clamps dissipate up to 150 mJ per channel to limit inductive kickback. The common copper power contact supports a continuous current of 10 A, allowing heavier loads to share power across the downstream terminals. The enclosure has an IP20 rating, requiring installation inside a control cabinet while protecting the electronics against contact with fingers and solid objects larger than 12 mm. This cabinet-mounted format places network connections, field power distribution, and local I/O channels in one compact head module.
Technical Specifications
Baud Rate
100 MBaud
Breaking Energy
150 mJ/channel
Bus Connection
2 x RJ45
Digital Inputs
4
Digital Outputs
8
E-bus Power Supply
1000 mA
Input Filter
3 ms
Max Cable Length
100 m
Output Current Per Channel
0.5 A
Power Contact Current
10 A
Power Supply
24 VDC
Propagation Delay
1 µs
Protection Class
IP20
Turn-off Time
300 µs
Turn-on Time
60 µs
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







