EK1814 by Beckhoff
Get a Quote for EK1814
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The EK1814 is an EtherCAT I/O coupler manufactured by Beckhoff for the EK EtherCAT Couplers series. It serves as a compact fieldbus interface that connects integrated sensor and actuator channels to an EtherCAT network. This arrangement gives controllers direct access to machine signals without requiring additional remote terminal blocks.
On the network side, the coupler maintains a throughput of 100 MBaud, and communication passes through two RJ45 sockets that support line or ring wiring. Internal processing adds only 1 µs of latency, preserving tight control loops in distributed systems. Standard copper cabling can span up to 100 m between adjacent nodes, simplifying cabinet placement across large machines. With external dimensions of 44 × 100 × 68 mm, the module fits on a 35 mm DIN rail without blocking airflow to neighboring devices. The four digital inputs are filtered for 3 ms to suppress contact bounce, while the four transistor outputs use the field supply. An E-bus backplane delivers 1000 mA to downstream terminals, allowing additional Beckhoff slices to be connected without a separate power feed. The power contacts accept the primary control voltage, keeping field wiring and internal logic power on the same connector.
Each output channel can source up to 0.5 A, and the module draws only 3 mA from the control voltage when its loads are idle. At just 125 g, the unit adds minimal mass to mobile or vibration-sensitive panels. Turn-on switching occurs in 60 µs, while turn-off takes 300 µs, providing predictable response when driving valves, relays, or contactors. The power-contact bus carries 24 VDC at up to 10 A, allowing multiple high-current loads to share a single feed without separate distribution blocks. The integrated E-bus supports direct electrical and mechanical connections between stacked modules.
Technical Specifications
Baud Rate
100 MBaud
Bus Connection
2 x RJ45
Delay
1 µs
Digital Inputs
4
Digital Outputs
4
Dimensions (w X H X D)
44 x 100 x 68 mm
E-bus Power Supply
1000 mA
Input Current
3 mA
Input Filter
3 ms
Input Nominal Voltage
24 VDC
Max Cable Length
100 m
Output Current Per Channel
0.5 A
Power Contacts
24 VDC, 10 A
Switching Times
TON 60 µs / TOFF 300 µs
Weight
125 g
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







