EK1561 by Beckhoff
Get a Quote for EK1561
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The EK1561 is an EtherCAT coupler produced by Beckhoff within the EK EtherCAT Couplers series. It connects a fieldbus segment to a modular set of Beckhoff I/O terminals and forwards process data between the EtherCAT network and the local E-bus. By integrating power contacts and signal conditioning in one housing, the unit serves as a compact gateway that distributes both control voltage and communication to adjacent terminal slices in industrial automation cells.
The coupler includes support for distributed clocks, allowing sub-microsecond synchronization of connected I/O devices for time-critical motion or measurement tasks. The internal E-bus receives up to 2 A, providing power for a dense stack of digital or analog terminals before an auxiliary feed is needed. The unit has three potential groups with electrical isolation between the sections; this segmentation limits fault propagation when different supply domains share the same rail. All incoming power must meet the SELV / PELV supply category, ensuring that exposed contacts remain within safe extra-low-voltage limits during maintenance or service work.
The output side contains three power contacts that carry the load voltage to downstream terminals. Each contact can carry up to 10 A, enabling actuators with moderate current demand to be wired without additional distribution blocks. These contacts carry the common 24 V power-contact line that feeds relays, sensors, and small drives. The electronics inside the coupler operate from a separate 24 VDC logic supply, which helps keep communication stable if field power is interrupted. The absence of a CoE interface simplifies configuration by limiting it to straightforward EtherCAT address mapping. The architecture also maintains deterministic cycle times when all power channels are fully loaded, supporting predictable process-data exchange across the connected terminal stack.
Technical Specifications
Coe Interface
No
Distributed Clocks Support
Yes
E-bus Supply
2 A
Potential Groups
3
Power Contact Count
3
Power Contact Current
10 A
Power Contact Voltage
24 V
Supply Type
SELV / PELV
Supply Voltage
24 VDC
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







