EK1541 by Beckhoff
Get a Quote for EK1541
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The EK1541 optical coupler is produced by Beckhoff for the EK EtherCAT Couplers series. It forms the interface between an EtherCAT fiber segment and the company's slice-based I/O terminals, allowing controllers to exchange process data with attached modules through a single head station. Within an automation cell, the device propagates deterministic telegrams while providing the system ID logic required for station addressing and diagnostics.
Data traffic moves across the optical link at 100 MBaud using the EtherCAT Device Protocol. Two simplex fibers terminate on a 2 x Versatile Link POF connector, and the medium is Polymeric Optical Fiber, a cost-effective plastic conductor that facilitates on-site assembly. A red LED source operating at approximately 650 nm injects light into the cable. The typical port-to-port delay is only 1 µs, so telegram timing remains within EtherCAT limits even when distributed clocks are enabled. Receiver circuitry tolerates inputs down to -26 dBm, while the transmitter launches at a minimum of -13.5 dBm to maintain the stated optical budget. An ID selector with three rotary switches provides eight distinct addresses for simple local identification. The Hot Connect feature can enumerate up to 4,096 removable subsegments without restarting the network, and the internal terminal bus accommodates as many as 65,535 I/O channels.
For plant wiring, the maximum optical span between two EK1541 couplers is 50 m, allowing cabinet-to-cabinet links without repeaters. The coupler passes field power to downstream terminals through contacts rated at 24 VDC and capable of supplying up to 10 A, so sensor and actuator loads can be powered directly from the backplane. The IP20 protection class indicates that the housing is intended for installation inside an enclosure with controlled ingress. The polymer optical fiber also eliminates ground-loop currents that could otherwise interfere with analog signals.
Technical Specifications
Baud Rate
100 MBaud
Bus Connection
2 x Versatile Link POF
Delay (typ.)
1 µs
Fiber Medium
Polymeric Optical Fiber
Id Switch Count
3
Max Coupler Distance
50 m
Max Hotconnect Ids
4096
Max Terminal Count
65535
Min Input Sensitivity
-26 dBm
Min Output Power
-13.5 dBm
Power Contact Current
10 A
Power Contact Voltage
24 VDC
Protection Class
IP20
Protocol
EtherCAT Device Protocol
Transceiver Wavelength
650 nm
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







