EK1521 by Beckhoff
Get a Quote for EK1521
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
Beckhoff's EK1521 is an optical EtherCAT coupler within the EK EtherCAT Couplers series. The unit terminates an upstream electrical EtherCAT segment and regenerates the telegram stream for a chain of terminal modules, serving as the network head of a distributed I/O station. Because the coupler transmits data over duplex fiber, it is intended for industrial automation sites that require galvanic isolation, extended reach, and immunity to radiated noise from variable-frequency drives, welders, or high-current busbars.
On the optical side, the device uses an SC duplex connector, providing separate transmit and receive paths that preserve full-duplex EtherCAT timing. The internal control code is firmware level 03, while the hardware revision is 0018; these references support compatibility with Beckhoff configuration tools and diagnostic libraries. The transceiver operates with multimode glass fiber (MM) cabling, so standard 50/125 µm backbones found in plant infrastructure can be used without mode conditioning. When connected to that core size, the transmitter provides a minimum launch strength of -23.5 dBm, ensuring a stable link margin over typical cabinet-to-cabinet distances. Synchronous process data is aligned through the distributed clocks function, allowing microsecond timing across multiple couplers.
In applications that use legacy 62.5/125 µm fiber, the average output level is no lower than -20 dBm, allowing existing plant wiring to remain in service. The receiver front end accepts signals as low as -31 dBm, so attenuation from patch panels, splice points, and aging connectors can be accommodated without carrier loss. An optical budget of 7.5 dB establishes the maximum permissible path loss and helps determine the achievable transmission distance. The selected emitter wavelength of 1310 nm corresponds to a low-dispersion window in multimode fiber, minimizing pulse spreading and keeping EtherCAT jitter within controller tolerances.
Technical Specifications
Connector Type
SC Duplex
Dc Firmware Level
03
Dc Revision Level
0018
Distributed Clocks
Yes
Fiber Mode
Multimode Glass Fiber (MM)
Minimum Output Power (50/125 µm)
-23.5 dBm
Minimum Output Power (62.5/125 µm)
-20 dBm avg.
Optical Input Sensitivity
-31 dBm
Optical Power Budget
7.5 dBm
Transceiver Wavelength
1310 nm
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







