EK1501-0100 by Beckhoff

Rated 4.6 stars (15 reviews)

Get a Quote for EK1501-0100

Request a quote or call us now at 1-888-551-3082!

In-Stock, Ships 3-5 Days

We respect your privacy. Your information is safe and will never be shared.

Secure Online
Checkout

Free Ground
Shipping

One Year
Warranty

The EK1501-0100 is a fiber-optic EtherCAT coupler produced by Beckhoff within the EK EtherCAT Couplers series. It forms the network head for a string of EtherCAT Terminals and converts optical frames into the electrical backplane format used by the I/O slices. By translating light signals directly to the terminal bus, the unit allows controllers to place high-density I/O clusters at remote machine sections while maintaining deterministic timing on the industrial Ethernet backbone.

An SC duplex connector receives the inbound fiber, while an RJ45 jack forwards the electrical segment; this dual bus connection simplifies daisy-chain layouts. The multimode link uses 50/125 µm multimode fiber and a transmitter centered at 1310 nm, supporting communication over the optical connection. Inside the coupler, a Fast Ethernet PHY handles the EtherCAT protocol at 100 Mbit/s. Signal isolation between field wiring and logic is rated at 500 V, protecting the industrial PC or PLC from ground potential shifts. The logic electronics draw 24 V DC, while the power contacts can deliver 10 A at 24 V DC, supporting sensors, valves, and small actuators without extra wiring. The optical receiver remains operational down to -31 dBm, enabling communication when attenuation approaches the permitted limit.

Addressing resources inside the device support up to 65,535 EtherCAT Terminals, and the internal memory map provides up to 4.2 GB of addressable I/O space for process data. During live operation, the HotConnect mechanism assigns up to 4,096 IDs, allowing complete terminal strands to be connected without stopping the network. The housing has a protection rating of IP20, indicating finger-safe openings suited for installation in a closed control cabinet. Optical isolation is maintained between the fiber and copper segments, allowing the coupler to link the controller and field wiring without an external media converter. Its compact housing also helps conserve rail space when the coupler is installed beside EtherCAT Terminals in a densely populated cabinet.

Technical Specifications

Bus Connection
1 x SC Duplex; 1 x RJ45 OUT

Fiber Type
50/125 µm Multi-Mode

Hotconnect Ids
4096

Isolation Voltage
500 V

Max Ethercat Terminals
65535

Max I/o Points
4.2 GB Addressable I/O Points

Optical Sensitivity
-31 dBm

Power Contact Current
10 A

Power Contact Voltage
24 VDC

Power Supply
24 VDC

Protection Rating
IP20

Protocol Rate
100 Mbit/s

Transceiver Wavelength
1310 nm

Click here for product datasheet

Contact Us

1620 Old Apex Road, Cary, NC 27513, USA

Toll Free: 1-888-551-3082

International: 1-919-443-0207

Fax: 1-919-867-6204

Email: sales@wakeindustrial.com

Shipping Options

DHLFedExUPSFreight

Payment Methods

American ExpressMasterCardVisaWire Transfer

Need Assistance?

Our team is here to help you find the right part for your needs.

Worldwide Shipping with FedEx and UPS.

We accept all major credit cards

1 year Automation Factory warranty on ALL products