EK1501-0010 by Beckhoff
Get a Quote for EK1501-0010
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The EK1501-0010 is a fiber-optic EtherCAT coupler produced by Beckhoff in the EK EtherCAT Couplers series. It interfaces an optical EtherCAT trunk with the E-bus backplane of a terminal segment, supplying communication and distributed 24 VDC power to the attached terminals. This arrangement allows controllers to extend real-time fieldbus operation across large facilities without sacrificing cycle accuracy in industrial automation tasks.
The optical transceiver operates at 100 MBaud, matching the line rate used by copper EtherCAT masters. An attenuation window of 10 dBm represents the permissible total signal loss between stations, and the housing provides 2 x SC duplex connectors so that incoming and outgoing fibers can be daisy-chained. Communication runs over single-mode glass fiber, which offers low dispersion and minimal signal degradation over long distances. When paired with suitable patch cords, the recommended link length can reach 20 km, enabling interbuilding or campus-wide topologies. The unit uses the EtherCAT Device Protocol and mounts on a 35 mm DIN rail. Its IP20 protection class is suitable for enclosed control cabinets, while dedicated 24 VDC terminals supply power to the coupler and subsequent I/O bus.
On the logical side, the coupler can expose up to 4.2 GB of addressable I/O data, providing sufficient space for high-density process images. It accepts as many as 65,535 EtherCAT Terminals on the downstream rail. The coupler also supports 4,096 hot-connect IDs, allowing machine modules to be reorganized while the system remains operational. The internal power path carries a maximum current of 10 A at 24 VDC through the power contacts, supporting substantial sensor and actuator loads without separate field-power wiring. Optical communication isolates the trunk from electromagnetic interference commonly found near motors, drives, and switching equipment. Status indicators provide a direct view of communication and power conditions during system operation.
Technical Specifications
Attenuation Budget
10 dBm
Baud Rate
100 MBaud
Bus Connection
2 x SC Duplex
Fiber Medium
Single-Mode Glass Fiber
Max Addressable I/o
4.2 GB Addressable I/O Points
Max Ethercat Terminals
65535
Max Hotconnect Ids
4096
Max Power Contact Current
10 A
Max Power Contact Voltage
24 VDC
Mounting Rail
35 mm DIN Rail
Power Supply
24 VDC
Protection Class
IP20
Protocol
EtherCAT Device Protocol
Recommended Max Distance
20 km
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







