EK1501 by Beckhoff
Get a Quote for EK1501
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The EK1501 is a fiber-optic EtherCAT coupler produced by Beckhoff within the EK EtherCAT Couplers series. Serving as the network root for a stack of electronic terminals, it converts optical EtherCAT segments to the internal E-bus so that modular I/O can be mounted on a DIN rail. In distributed machines, the coupler allows long-distance link segments while retaining the telegram timing established by the protocol.
The optical interface is provided by two SC duplex connectors that accept multimode glass fiber pairs. At the physical layer, the unit transmits and receives EtherCAT frames at 100 Mbaud, matching the line rate of copper couplers. Inside the housing, the E-bus backplane is energized with 5 V, so the downstream terminals draw logic power without additional wiring. Module self-consumption is 130 mA plus one-quarter of the total E-bus current, a value used when sizing the upstream DC rail. For topology changes, the controller can recognize up to 4096 Hot Connect IDs, allowing dynamic insertion of station segments during operation. With an attenuation budget matched to its transmitter output, fiber runs can extend up to 2 km while maintaining the signal margin required by the EtherCAT Device Protocol.
The coupler maps process data from the attached terminals into a single 4-byte-aligned address space that can scale to 4.2 GB of addressable I/O points. A directory supports as many as 65,535 terminal indexes before segmentation is needed. The receiver can detect optical power as low as -31 dBm, while its transmitter launches near -20 dBm on 62.5/125 µm core fiber. Field supply is routed through the internal power contacts, which are rated for 24 VDC and 10 A, while the electronics are powered from a dedicated 24 VDC input so external breakers can share a common connection. All components are housed in an IP20 enclosure intended for installation inside a control cabinet.
Technical Specifications
Bus Connection
2 x SC Duplex
Current Consumption
130 mA + (? E-bus current)/4
Data Rate
100 MBaud
E-bus Voltage
5 V
Fiber Medium
Multimode Glass Fiber (MM)
Hotconnect Ids
4096
Max Addressable I/o
4.2 GB addressable I/O points
Max Coupler Distance
2 km
Max Ethercat Terminals
65535
Network Protocol
EtherCAT Device Protocol
Optical Input Sensitivity
-31 dBm
Output Power (62.5/125 µm)
-20 dBm
Power Contacts
24 VDC, 10 A
Power Supply
24 VDC
Protection Class
IP20
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







