EK1400 by Beckhoff
Get a Quote for EK1400
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The EK1400 is an EtherCAT coupler produced by Beckhoff for the EK EtherCAT Couplers series. It installs on a 35 mm DIN rail and links an EtherCAT trunk line to the manufacturer's slice-style I/O terminals, creating a scalable node for PLC-controlled machinery. A polycarbonate enclosure protects the internal circuitry and supports installation inside a control cabinet. Communication on the upstream side follows the EtherCAT protocol, allowing real-time data exchange among drives, sensors, and supervisory controllers without additional gateways.
Network access is provided through two RJ45 sockets that daisy-chain adjacent stations and support a line topology at a transmission rate of 1 Gbit/s. Inside the device, an address space for up to 65,534 terminals accommodates very large I/O expansions without requiring bus segmentation. The power backplane supplies field modules through contacts that can conduct up to 10 A, while the electronics inside the coupler draw from a nominal supply of 24 V DC. Separate power contacts use the same source, allowing actuators and sensors to receive power without additional supply wiring. An enclosure rating of IP20 restricts the coupler to closed control panels that protect it from moisture and small airborne contaminants. The housing is 73 mm deep and 100 mm tall, so it can be mounted alongside breakers, relays, and other control equipment without requiring an unusually deep enclosure.
Copper segments between couplers may span up to 100 m, giving panel builders flexibility when distributing control islands across a factory floor. The front housing measures 71 mm wide, permitting dense row mounting while leaving room for field wiring and adjacent terminals. System configuration is carried out in Beckhoff's TwinCAT software, where the coupler appears as a bus head with automatically enumerated terminals. Guided air paths inside the panel dissipate heat generated during operation, allowing the device to function without auxiliary fans. The DIN rail attachment also keeps the coupler aligned with connected I/O terminals and provides straightforward access to its network and power connections.
Technical Specifications
Bus Interface
2 x RJ45
Configuration Software
TwinCAT
Depth
73 mm
Height
100 mm
Housing Material
Polycarbonate
Maximum Power Contact Current
10 A
Maximum Power Contact Voltage
24 V DC
Maximum Station Distance
100 m
Maximum Terminal Count
65,534
Mounting Rail Width
35 mm
Nominal Supply Voltage
24 V DC
Protection Rating
IP20
Protocol
EtherCAT
Transmission Rate
1 Gbit/s
Width
71 mm
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







