EK1122-0080 by Beckhoff
Get a Quote for EK1122-0080
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The EK1122-0080 is an EtherCAT coupler produced by Beckhoff within the EK EtherCAT Couplers series. The module functions as a passive branch element that mounts directly on a DIN rail next to compatible I/O terminals. It divides the fieldbus into two compact branches without requiring an active Ethernet switch, while preserving the timing of real-time EtherCAT telegrams. The coupler can create star networks or separate groups of motion axes, helping maintain deterministic communication between the controller and distributed I/O devices. Its compact terminal-style housing also allows the junction to be installed within an existing EtherCAT terminal station without occupying a separate mounting area.
Internally, the unit operates as a two-port EtherCAT junction. Telegrams arriving from the upstream bus travel through the two branches and return according to the frame sequence 1-2-E-Bus. A total of 2 ports keeps the branch arrangement compact and provides a consistent propagation path for cycle-time calculations. The housing has an IP20 rating, so the module should be installed in a control cabinet when protection from dust or liquids is necessary. The Fast Hot Connect function allows the EtherCAT master to recognize the coupler quickly after power-up or reconnection. This short recognition process reduces the delay before connected devices can resume communication following a planned interruption.
During a cold start, the device provides a group boot-up time of less than 1 second, supporting systems that must establish network communication promptly. It is intended for layouts using a star topology, allowing separate EtherCAT branches to originate from one terminal station. When a branch remains disconnected, the unit automatically bridges ports 1 and 2 to preserve link continuity along the available communication path. The design does not require EtherCAT distributed clocks, making it suitable for applications that use cyclic data exchange without distributed clock synchronization. The specially marked Fast Hot Connect sockets make the applicable branch connections easy to identify during installation. Hot swapping is disabled during operation, so power must be removed before a connected cable is exchanged.
Technical Specifications
Device Function
2-Port EtherCAT Junction
Distributed Clocks Required
No
Fast Hot Connect
Yes
Fhc Port Marking
Specially Marked
Frame Forwarding Order
1 Then 2 Then E-Bus
Group Boot-up (no Dc)
<1 s
Hot Swap During Operation
No
Intended Topology
Star
Port Count
2
Protection Class
IP20
Unused Port Behavior
Ports 1 And 2 Bridged
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







