EK1122 by Beckhoff
Get a Quote for EK1122
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The EK1122 is a dual-junction EtherCAT coupler produced by Beckhoff and supplied under the EK EtherCAT Couplers series. In an automation cell, the unit serves as a network branch point, allowing two subordinate lines to attach to the primary EtherCAT trunk while continuing the internal E-bus to downstream I/O terminals. By performing this distribution within the DIN-rail footprint, it removes the need for external switches and simplifies cabinet wiring.
Each junction uses the branch sequence 1->2->E-bus, so incoming frames are forwarded first to junction 1, then to junction 2, and finally to the backplane bus that links additional terminals. The device provides two independent branches, enabling point-to-point connections or localized subnets inside the machine. Its enclosure carries the IP20 protection class, indicating finger-safe terminals and suitability for installation inside a control cabinet. The network uses a star topology, meaning both outgoing ports behave as individual node roots rather than as a line extension. When neither branch is cabled, the internal logic keeps communication active by maintaining a bridge between junctions 1 and 2, preventing an inadvertent link break.
Compatibility with networks using distributed clock synchronization begins at revision -0017 with FW 01. Earlier hardware revisions cannot generate DC reference signals, but they still pass EtherCAT traffic transparently through the connected branches. Because EtherCAT timing can be handled by upstream devices on the primary trunk, the coupler operates with no distributed clocks of its own and does not introduce additional jitter. The module is non-hot-swappable, so power must be removed before insertion or removal to avoid interrupting the EtherCAT ring. The housing follows the mounting dimensions used by other EK modules, allowing aligned installation on the same DIN rail.
Technical Specifications
Branch Order
1->2->E-bus
Dc Support Start
Rev -0017 / FW 01
Distributed Clocks Required
No
Hot Swap
No
Junction Count
2
Protection Class
IP20
Topology Use
Star
Unused Ports State
Junctions 1 And 2 Bridged
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







