EK1121-0010 by Beckhoff
Get a Quote for EK1121-0010
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The EK1121-0010 is an EtherCAT coupler manufactured by Beckhoff within the EK EtherCAT Couplers series. It links an EtherCAT fieldbus segment to the E-bus I/O terminals, allowing a controller to exchange process data with decentralized modules through a single network cable. By converting incoming EtherCAT telegrams to the internal E-bus format, the unit serves as a compact interface component for modular, DIN-mounted automation panels.
The coupler has one RJ45 port, so wiring to the preceding node or master is straightforward with standard twisted-pair patch cables. Data moves across this port at a line speed of 100 Mbit/s, enabling cycle times suitable for fast machine-control tasks. Mechanical installation is handled by a clip for a 35 mm DIN rail, which secures the device inside control cabinets without additional brackets. The enclosure carries an IP20 rating, indicating finger-safe protection and compatibility with the dry, clean environments typical of electrical enclosures. Operation is permitted at temperatures up to 55 °C, so the coupler can reside near heat-generating drives or power supplies as long as cabinet ventilation keeps the local temperature within this limit.
The housing has a depth of 52 mm and a height of 100 mm, keeping the footprint small and leaving rail space for additional slices or terminal blocks. For mobile tooling or line-changeover stations, Hot Connect support permits network reconfiguration without shutting down the entire EtherCAT ring. An extended-distance link of up to 300 m can be achieved with appropriate copper cabling, providing layout flexibility in large installations. The shell is molded from polycarbonate, which withstands typical control-panel vibration and provides good electrical insulation. Four 22 AWG conductors inside the CAT5e-class cable carry the signaling pairs, while the downstream terminals receive their logic power through the internal E-bus backplane.
Technical Specifications
Bus Interface
1 x RJ45
Cable Conductor Count
4
Cable Conductor Gauge
22 AWG
Depth
52 mm
Height
100 mm
Hot Connect
Supported
Housing Material
Polycarbonate
Maximum Extended-distance Link Length
300 m
Maximum Operating Temperature
55 °C
Mounting
35 mm DIN Rail
Power Supply
E-bus
Protection Rating
IP20
Protocol
EtherCAT
Transmission Rate
100 Mbit/s
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







