EK1110-0043 by Beckhoff
Get a Quote for EK1110-0043
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The EK1110-0043 EtherCAT coupler is produced by Beckhoff within the EK EtherCAT Couplers series. It terminates a line of EtherCAT Terminals and extends the fieldbus through a standard RJ45 link, creating a seamless handoff to the next segment. When mounted on a DIN rail, the device propagates synchronized process data between modular I/O stations and the central controller without requiring active switches or repeaters.
The integrated bus logic forwards information at a rate of 100 Mbit/s, matching the full-duplex bandwidth of Fast Ethernet while preserving EtherCAT timing. Connected terminals draw their logic supply from the system's 24 VDC field voltage, so no secondary power line is required along the terminal string. Network continuity is provided by a single 1 × RJ45 port that accepts shielded cables suitable for Cat 5 performance. Mechanical attachment follows the EN 60715 profile; a 35 mm rail clip secures the housing and grounds the shield through the mounting foot. The enclosure meets the IP20 protection rating, making it suitable for dry, clean cabinet environments while helping prevent contact with live parts when properly installed.
The E-bus and mounting rail have a dielectric strength of 500 V, helping prevent ground loops across distributed panels. Terminal communication is maintained by an internal backplane that carries a regulated 3.3 V E-bus supply to each plug-in module. Board access is provided through a Samtec SSQ-112-21-L-D-K-TR connector, and the rear interface exposes 24 pins so the coupler can connect directly to PCB tracks in compact subassemblies. The device transports EtherCAT protocol frames, but CoE services are omitted. Primary cabling on port X1 must use a shielded Cat 5 EtherCAT cable. The daisy-chain connection on port X2 is routed over internal PCB traces to minimize insertion loss.
Technical Specifications
Coe Support
None
Data Transfer Rate
100 Mbit/s
Dielectric Strength
500 V
E-bus Voltage
3.3 V
Ethercat Port
1 x RJ45
Field Voltage
24 VDC
Mounting Rail
35 mm
Pcb Connector
Samtec SSQ-112-21-L-D-K-TR
Protection Class
IP20
Protocol Support
Any EtherCAT Protocol
Rear Connector Pins
24
X1 Data Medium
Shielded Cat. 5 EtherCAT Cable
X2 Data Medium
PCB Tracks
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







