EK1110-0008 by Beckhoff
Get a Quote for EK1110-0008
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The EK1110-0008 is an EtherCAT coupler produced by Beckhoff within the EK EtherCAT Couplers series. It terminates a standard EtherCAT line and forwards fieldbus power and real-time data to a stack of I/O terminals, allowing controllers to add distributed sensors or actuators without extra wiring. By converting the physical layer of an upstream Ethernet cable into the internal terminal communication rail, the device forms the entry point for modular, DIN-rail-based automation islands.
The coupler snaps onto a 35 mm DIN rail, so installation inside control cabinets follows common mounting conventions. Its enclosure is molded from polycarbonate, providing electrical insulation and low weight while withstanding typical panel temperatures. Its overall dimensions are 44 × 100 × 68 mm, which leave clearance for side-by-side accessories. Communication with the preceding node operates at 100 Mbit/s, and the copper link uses a shielded Category 5 Ethernet/EtherCAT cable. A shielded M8 screw interface provides a secure connection that resists vibration. An IP20 rating limits use to protected indoor areas, and the body can be placed in any installation position without affecting performance.
I/O terminals clip to the coupler through a double-slot-and-key connection, allowing side-by-side mounting without tools and ensuring correct signal alignment on the backplane. The backplane also feeds the electronics, so no external supply is required; operating power is taken from the E-bus, simplifying wiring. Regardless of the attached modules, the unit relays frames using any EtherCAT protocol. It maintains deterministic timing across a segment length of up to 100 m between stations when Category 5e shielding is maintained. The available distance and broad protocol support allow a single rail segment to connect sensors, drives, and safety devices under uniform cycle control.
Technical Specifications
Bus Interface
1 x M8, Shielded, Screw Type
Dimensions (w X H X D)
44 x 100 x 68 mm
Housing Material
Polycarbonate
Installation Position
Variable
Max Station Distance
100 m
Mounting
35 mm DIN Rail
Power Supply
From E-bus
Protection Rating
IP20
Protocol
Any EtherCAT Protocol
Side-by-side Mounting
Double Slot And Key Connection
Transmission Medium
Ethernet/EtherCAT Cable (Cat.5 Min), Shielded
Transmission Rate
100 Mbit/s
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







