EK1110 by Beckhoff
Get a Quote for EK1110
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The EK1110 EtherCAT coupler is produced by Beckhoff within the EK EtherCAT Couplers series. As an interface component, it attaches a fieldbus segment to EtherCAT I/O terminals, allowing controllers to exchange real-time data with distributed sensors and actuators in a machine cell. By sitting at the head of an I/O station, the coupler translates fast EtherCAT telegrams for the internal E-bus. This function supports deterministic communication between the controller and connected automation devices.
The unit has a single RJ45 port that carries the EtherCAT protocol while supporting a compact profile and straightforward daisy-chain wiring. Data moves across that link at 100 Mbit/s, which is compatible with standard Fast Ethernet hardware and supports the short cycle times required by motion systems. The internal electronics draw 130 mA from the E-bus, allowing the upstream power module to provide an appropriate supply. A permitted station spacing of 100 m corresponds to the maximum reach of copper Ethernet and accommodates equipment distributed across large production lines without repeaters. Its IP20 protection class makes the device suitable for installation in clean control cabinets. The 44 mm × 100 mm × 68 mm enclosure also tolerates the temperature and vibration commonly found inside industrial control panels.
The housing clips onto a 35 mm DIN rail, allowing the coupler to share a mounting rail with terminal blocks, power modules, and circuit protection devices. Signal quality is maintained through a shielded Cat. 5 Ethernet cable, which limits electromagnetic interference and satisfies the required attenuation limits. The polycarbonate housing provides electrical insulation while keeping the unit lightweight. The coupler supports a line topology, allowing downstream I/O nodes to be connected sequentially without network switches. Logic power is supplied exclusively through the E-bus, so the device does not require a separate power supply connection. Its variable mounting orientation provides flexibility when arranging components inside a control cabinet.
Technical Specifications
Bus Interface
1 x RJ45
Dimensions (w X H X D)
44 mm x 100 mm x 68 mm
Distance Between Stations
100 m
E-bus Current (typ.)
130 mA
Housing Material
Polycarbonate
Installation Position
Variable
Mounting
35 mm DIN Rail
Network Topology
Line
Power Supply
E-bus
Protection Rating
IP20
Protocol
EtherCAT
Transmission Medium
Shielded Cat.5 Ethernet Cable
Transmission Rate
100 Mbit/s
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







