EK1101-0080 by Beckhoff

Rated 4.9 stars (18 reviews)

Get a Quote for EK1101-0080

Request a quote or call us now at 1-888-551-3082!

In-Stock, Ships 3-5 Days

We respect your privacy. Your information is safe and will never be shared.

Secure Online
Checkout

Free Ground
Shipping

One Year
Warranty

The EK1101-0080 is an EtherCAT coupler produced by Beckhoff as part of the EK EtherCAT Couplers series. It links a 100BASE-TX network segment to the E-bus terminal stack, allowing field devices connected through DIN-rail I/O modules to appear as addressable process data to the PLC or IPC. Within an automation cell, the coupler serves as the first node of a terminal strand and manages time-critical exchanges between Ethernet frames and the backplane bus.

The two integrated RJ45 ports support line-topology wiring and pass traffic at a full-duplex rate of 100 MBaud. Internal telegram processing adds a typical propagation delay of only 1 µs, maintaining distributed clock accuracy for motion or sampling tasks. Downstream terminals draw their logic power from an E-bus rail that the coupler stabilizes at 5 V, while its electronics require a base current of 70 mA plus one-quarter of the total terminal current. The unit accepts up to 4.2 GB of addressable I/O space and can forward data for as many as 65,535 EtherCAT terminals. Fast Hot Connect capability allows a controller to reconfigure the network without stopping overall communication. This functionality supports modular machinery in which terminal groups may be connected or disconnected while the remaining network continues operating.

The incoming supply of 24 VDC is galvanically isolated from the bus side by up to 500 V, protecting the control electronics from field transients. Separate power contacts rated for 10 A distribute load current to terminals with higher power demands. Up to 4096 configurable node IDs provide unambiguous addressing in complex machine layouts. The coupler's IP20 housing supports cabinet installation with shielded cables up to 100 meters long and maintains compliance with the EtherCAT Device Protocol. Properly terminated cabling helps preserve deterministic data transfer during normal operation and network reconfiguration.

Technical Specifications

Addressable I/o
4.2 GB

Baud Rate
100 MBaud

Bus Ports
2 x RJ45

Configurable Ids
4096

Current Consumption
70 mA + (? E-bus current)/4

Delay
1 µs Typ.

E-bus Voltage
5 V

Fast Hot Connect
Yes

Isolation Voltage
500 V

Max Cable Length
100 m

Max Ethercat Terminals
65535

Network Standard
100BASE-TX

Power Contact Current
10 A

Protection Rating
IP20

Protocol
EtherCAT Device Protocol

Supply Voltage
24 VDC

Click here for product datasheet

Contact Us

1620 Old Apex Road, Cary, NC 27513, USA

Toll Free: 1-888-551-3082

International: 1-919-443-0207

Fax: 1-919-867-6204

Email: sales@wakeindustrial.com

Shipping Options

DHLFedExUPSFreight

Payment Methods

American ExpressMasterCardVisaWire Transfer

Need Assistance?

Our team is here to help you find the right part for your needs.

Worldwide Shipping with FedEx and UPS.

We accept all major credit cards

1 year Automation Factory warranty on ALL products