EK1101-0010 by Beckhoff
Get a Quote for EK1101-0010
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The EK1101-0010 is an EtherCAT coupler produced by Beckhoff within the EK EtherCAT Couplers series. It links a control PC or PLC to a string of Beckhoff terminals so that distributed digital and analog channels appear as one logical node on the network. By converting fast Ethernet frames into the internal terminal bus format, the device enables deterministic I/O updates required in motion, packaging, and process-control systems.
On the fieldbus side, the coupler transmits over 100BASE-TX Ethernet at a line speed of 100 Mbaud. Physical cabling is routed through two RJ45 sockets, allowing direct daisy-chain wiring without intermediate switches. Frames conform to the EtherCAT Device Protocol, and the hardware forwards them with a typical propagation delay of 1 µs, preserving real-time performance. The electronics are energized by a control supply of 24 V DC, while integrated power contacts can feed up to 10 A to attached terminals so that auxiliary loads share the same backbone. Installation is simplified by a 35 mm DIN mounting rail, and the housing carries an ingress protection rating of IP20, making it suitable for sheltered control cabinets. Standard copper segments may span 100 m between nodes. The specified transmission medium maintains immunity to industrial electromagnetic noise while sustaining full-duplex throughput.
The coupler can accommodate up to 65,535 EtherCAT terminals, and the total addressable process image can reach 4.2 GB. When machinery extends beyond a single cabinet, the coupler supports a cumulative link length of 300 m by using two additional switches while maintaining the topology through automatic forwarding-delay compensation. Hot Connect functionality supports rapid reconfiguration by allowing each removable I/O block to receive one of 4,096 IDs, enabling controllers to detect and map changes without stopping operation.
Technical Specifications
Addressable I/o Points
4.2 GB max
Baud Rate
100 MBaud
Bus Connection
2 x RJ45
Communication Protocol
EtherCAT Device Protocol
Data Transfer Medium
Ethernet 100BASE-TX
Ethercat Terminals
65535 max
Extended Link Length
300 m max
Hotconnect Ids
4096 max
Mounting Rail
35 mm
Power Contact Current
10 A max
Power Supply
24 VDC
Propagation Delay
1 µs typ.
Protection Rating
IP20
Standard Link Length
100 m max
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







