EK1101-0008 by Beckhoff
Get a Quote for EK1101-0008
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The EK1101-0008 EtherCAT coupler is produced by Beckhoff as part of the EK EtherCAT Couplers series. Designed for DIN-rail mounting in control cabinets, the device acts as the network entry point for a block of EtherCAT Terminals, translating Ethernet-based telegrams into the internal process image required by each terminal slice. Within an automation cell, it connects the PLC or IPC to distributed sensors, valves, or drives. It also forwards the 24 V system supply along the E-bus so that the modules receive data and power through one compact assembly.
Two compact M8 sockets labeled IN and OUT provide a 2 × M8 bus interface. Through this connection, the coupler exchanges frames at up to 100 Mbit/s while supporting the 100BASE-TX Ethernet standard and requiring at least a CAT 5 twisted-pair cable. Three hexadecimal ID switches provide local addressing without software tools. An isolation barrier rated at 500 V separates the fieldbus from the power domain, while a continuous E-bus feed of 2 A supplies the attached terminals. The connection supports a maximum segment length of 100 m, and the device can operate at up to 95% relative humidity. The IP20 enclosure protects against contact with hazardous internal components and the entry of larger solid objects. The electronics draw a nominal 24 VDC from the control cabinet supply.
The coupler can manage up to 65,535 EtherCAT Terminals and create a process image as large as 4.2 GB. This capacity allows one head station to accommodate extensive mixed-signal installations before additional masters are required. For automatic tool changes or movable substations, the coupler supports up to 4,096 Hot Connect IDs, allowing segments to be detached and reattached while network communication continues. Power contacts routed through the coupler support a continuous load of 10 A on the common supply rail, enabling sensors and actuators on the terminal string to share power without separate wiring.
Technical Specifications
Bus Interface
2 x M8
Data Rate
100 Mbit/s
E-bus Current <=55 C
2 A
Id Switches
3 Hexadecimal
Isolation Voltage
500 V
Max Addressable I/o
4.2 GB
Max Coupler Distance
100 m
Max Ethercat Terminals
65535
Max Hotconnect Ids
4096
Max Power Contact Current
10 A
Max Relative Humidity
95%
Min Cable Category
CAT 5
Network Standard
100BASE-TX
Power Contact Voltage
24 VDC
Power Supply
24 VDC
Protection Class
IP20
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







