EK1101 by Beckhoff
Get a Quote for EK1101
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The EK1101 from Beckhoff belongs to the EK EtherCAT Couplers series and operates as the primary interface between an EtherCAT master and a row of modular I/O terminals. In an automated production line, it translates fieldbus frames directly into signals for the local terminal backplane. This arrangement allows connected sensors, valves, and drives to exchange process data with the deterministic timing required by motion, packaging, and assembly applications.
The EtherCAT Device Protocol communicates over Ethernet 100BASE-TX at a data rate of 100 MBaud. The coupler has two shielded RJ45 ports that form an internal switch, allowing stations to be connected in a line without separate networking hardware. Compatible cabling can extend up to 100 m between devices while maintaining signal integrity. Each coupler introduces a propagation delay of only 1 µs, supporting control systems that depend on rapid and predictable data transfer. The network can use up to 4096 Hot Connect IDs, allowing designated machine segments to be connected or disconnected during operation. The available EtherCAT address space accommodates 4.2 billion peripheral I/O points, and full-duplex communication prevents frame collisions on the link. Galvanically isolated communication circuitry separates the network connection from other electrical sections, while the low-jitter data path supports synchronized axes.
The internal electronics operate from a stabilized 24 VDC supply. Through-fed power contacts can distribute up to 10 A to downstream terminals, allowing multiple I/O modules to receive field power through the terminal assembly. A dielectric barrier rated at 500 V separates the field wiring from the logic circuitry and reduces the effect of common-mode disturbances. The housing has an IP20 protection rating, which protects against accidental contact with hazardous internal parts but does not provide water protection. It clips onto a 35 mm DIN rail and occupies a mounting width of 35 mm inside the control cabinet. The permitted operating environment includes relative humidity of up to 95 percent. A single EtherCAT network can accommodate as many as 65,535 terminals, giving the coupler access to large distributed I/O configurations without requiring a separate gateway for each terminal group.
Technical Specifications
Baud Rate
100 MBaud
Bus Connection
2 x RJ45
Data Transfer Medium
Ethernet 100BASE-TX
Hotconnect Ids
4096
Isolation Voltage
500 V
Max Cable Length
100 m
Max Ethercat Terminals
65535
Max Relative Humidity
95%
Mounting Rail Width
35 mm
Peripheral Signals
4.2 GB I/O Points
Power Contact Current
10 A
Power Contact Voltage
24 VDC
Propagation Delay
1 µs
Protection Rating
IP20
Protocol
EtherCAT Device Protocol
Supply Voltage
24 VDC
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







