EK1000 by Beckhoff
Get a Quote for EK1000
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The EK1000 coupler is produced by Beckhoff and belongs to the EK EtherCAT Couplers series. It links a standard Ethernet Time-Sensitive Networking line to a modular stack of EtherCAT I/O terminals, translating incoming frames into the fieldbus protocol used on the E-bus backplane. Within automated machinery, the unit anchors distributed I/O so a PLC can gather sensor data and issue actuator commands through a single network connection.
Port X001 uses an RJ45 100 Mbit/s Ethernet (TSN) interface, providing deterministic TSN ingress for the coupler, while port X002 provides an RJ45 EtherCAT outlet that propagates frames to downstream terminals. The internal connection uses the 100BASE-TX copper medium for data transfer. Up to 65,535 EtherCAT terminals can be addressed, providing extensive logical capacity for digital and analog modules. The E-bus backplane supplies a continuous 2 A to power the electronic sections of the connected terminals without external feeders. The network segment between the controller and the coupler can reach 100 m when Category 5e cabling is used. Configuration requires at least TwinCAT version 3.1.4024.32 so the software can recognize the device profile and provide the appropriate settings.
Control voltage is delivered to the head station at 24 VDC. The power contacts integrated into the terminal bus can carry up to 10 A for field devices that require a separate load supply. The compact housing measures 71 × 100 × 73 mm, allowing dense installation on a DIN rail, while its mass of 218 g keeps enclosure loads low. EtherCAT Open Mode is supported, allowing masters to forward process data without distributed clocks when that topology is preferred. The coupler mounts directly beside compatible EtherCAT terminals, creating a continuous backplane connection without separate internal network cables.
Technical Specifications
Bus Interface X001
RJ45 100 Mbit/s Ethernet (TSN)
Bus Interface X002
RJ45 100 Mbit/s EtherCAT
Data Rate
100 Mbit/s
Data Transfer Medium
Ethernet 100BASE-TX
Dimensions (w X H X D)
71 x 100 x 73 mm
E-bus Supply
2 A
Max Cable Length
100 m
Max Ethercat Terminals
65535
Min Twincat Version
v3.1.4024.32
Power Contact Current
10 A
Power Contact Voltage
24 VDC
Power Supply
24 VDC
Protocol
EtherCAT Open Mode
Required Supply Output
4 A At 24 V
Weight
218 g
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







