CX8095 by Beckhoff
Get a Quote for CX8095
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The CX8095 is an embedded PC module produced by Beckhoff within the CX Embedded PC Systems series. Designed to sit at the head of a K-bus or E-bus slice, it combines PLC functionality with local I/O processing. Control logic can therefore run directly on the DIN-rail controller rather than on a separate panel PC. This arrangement reduces the number of control components required inside the electrical cabinet while retaining direct access to connected terminals.
An Arm9 processor operating at 400 MHz executes real-time tasks while supporting operating system multitasking. Runtime data is buffered in 64 MB RAM, while application binaries and boot files are stored on a removable 512 MB microSD card. The internal electronics draw only 3 W under typical load, and up to 10 W is available for attached E-bus or K-bus terminals. The terminal block provides 2 A for I/O electronics, while its power contacts can carry 10 A to downstream modules. For process data exchange, the bus controller handles 2 kB of input data and 2 kB of output data during each cycle, providing capacity for medium-sized control systems. Dielectric strength is rated at 500 V, creating galvanic separation between the field and logic circuits. Watchdog logic preserves variables during the one-second UPS backup interval if the main supply rail loses power.
System power is supplied through spring terminals using a 24 VDC feed, which provides a secure connection for cabinet wiring. The housing has an IP20 rating and is intended for installation in a ventilated electrical cabinet. Its compact dimensions of 64 × 100 × 73 mm permit dense DIN-rail mounting alongside I/O terminals and other automation components. Communication with higher-level controllers or HMI stations is provided through the built-in Ethernet/IP Slave port. The network connection allows process values and control commands to be exchanged with supervisory equipment while the local processor manages the attached terminals.
Technical Specifications
Cpu Clock
400 MHz
Dielectric Strength
500 V
Dimensions (W x H x D)
64 x 100 x 73 mm
Fieldbus Interface
Ethernet/IP Slave
Flash Memory
512 MB microSD
I/o Terminal Supply
2 A
K-bus Process Data
2 kB In / 2 kB Out
Main Memory
64 MB RAM
Max E-bus/k-bus Power
10 W
Max Power Consumption
3 W
Power Contacts Current
10 A
Power Supply
24 VDC
Processor Type
Arm9
Protection Rating
IP20
Ups Backup Time
1 s
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







