CX8080 by Beckhoff
Get a Quote for CX8080
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The CX8080 is an embedded PC manufactured by Beckhoff and supplied within the CX Embedded PC Systems series. It serves as a compact PLC and communication gateway for industrial automation projects. The controller combines local I/O, real-time logic, and fieldbus networking in a 64 × 100 × 73 mm housing that mounts alongside standard terminal blocks.
An Arm9 processor clocked at 400 MHz handles control tasks, while the unit's 64 MB of RAM provides volatile workspace for the real-time operating system and application code. Program and data retention is supported by a 512 MB microSD card that plugs into an internal slot. The controller accepts a nominal supply of 24 VDC and draws no more than 3 W, minimizing cabinet heat and allowing simple 24 V power distribution. Internal circuitry withstands a 500 V dielectric test between the supply and protective earth. A 2 A I/O terminal supply is routed through the base unit, so field modules receive power without separate wiring. The main board includes a UPS capacitor that maintains logic for one second, allowing variables to be saved when input power is interrupted. The enclosure has an IP20 rating for use in typical dry control panels.
Network and expansion ports are grouped on the front edge. A single RJ45 10/100 Mbit/s Ethernet port links the PLC to SCADA systems or higher-level controllers, and a K-bus or E-bus interface lets the base connect directly to Beckhoff digital or analog terminals without adapters. Serial communication is available through a D-sub connector that can operate in RS232 or RS485 mode, while a single USB device port supports service uploads. The programming environment follows the IEC 61131-3 standard, allowing ladder logic, structured text, and function block diagrams to be downloaded from TwinCAT software. These interfaces allow the controller to exchange process data with local terminals, supervisory systems, and other industrial devices. The front-facing arrangement also keeps network, serial, and service connections accessible after the controller is installed beside its I/O terminals.
Technical Specifications
Cpu Clock
400 MHz
Dielectric Strength
500 V
Dimensions (W x H x D)
64 x 100 x 73 mm
Ethernet Port
1 x RJ45, 10/100 Mbit/s
Flash Memory
512 MB microSD
I/o Terminal Interface
K-bus Or E-bus
I/o Terminal Supply
2 A
Main Memory
64 MB RAM
Max Power Consumption
3 W
Nominal Supply Voltage
24 VDC
Processor
Arm9
Programming Language
IEC 61131-3
Protection Rating
IP20
Serial Port
1 x D-sub (RS232/RS485)
Ups Buffer Time
1 s
Usb Port
1 x USB Device
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







