CX8050 by Beckhoff
Get a Quote for CX8050
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The CX8050 is an embedded PC controller manufactured by Beckhoff within the CX Embedded PC Systems series. As a compact DIN-rail device, it combines PLC logic, runtime memory, and fieldbus connectivity so that machine builders can execute control tasks directly next to their I/O terminals. Its integrated CAN Master interface simplifies decentralized I/O topologies and allows the unit to forward process variables to higher-level networks in industrial automation.
It is driven by an ARM9 processor operating at 400 MHz, which provides sufficient performance for typical PLC cycles. The control program executes from 64 MB of RAM, while application files and the boot image reside on a removable 512 MB microSD card. The internal supply requires 24 VDC, and a conversion stage limits rail ripple and isolates the logic from the plant mains. During operation, the system draws only 10 W of bus power, minimizing heat inside the cabinet. A dielectric strength of 500 V separates the field and logic domains to protect the controller against electrical transients. An uninterruptible 1 MB buffer on the microSD card preserves the last process image during brownouts. The K-bus supports 2 kB of process data in each direction, providing capacity for numerous digital and analog points without saturating the backplane bandwidth.
The terminal header can deliver up to 2 A of I/O supply current for peripheral loads, eliminating the need for separate power blocks for small sensors. The housing measures 64 × 100 × 73 mm, allowing multiple controllers to fit side by side on standard 35 mm rails. Its low mass of 180 g reduces strain on modular enclosures. Programs are written in internationally recognized IEC 61131-3 languages and downloaded through the integrated web manager. A CAN Master port exchanges cyclic data with drives or remote modules, while the unit draws a maximum of 3 W in standby mode when the machine is idle.
Technical Specifications
Bus Power Consumption
10 W
Dielectric Strength
500 V
Dimensions
64 x 100 x 73 mm
Fieldbus Interface
CAN Master
Flash Memory
512 MB microSD
I/o Supply Current
2 A
K-bus Process Data
2 kB In / 2 kB Out
Main Memory
64 MB RAM
Max Power Consumption
3 W
Power Supply
24 VDC
Processor
Arm9, 400 MHz
Programming Standard
IEC 61131-3
Ups Buffer Size
1 MB on microSD card
Web Management
Yes
Weight
180 g
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







