CX8010 by Beckhoff
Get a Quote for CX8010
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The CX8010 is an embedded PC controller manufactured by Beckhoff within the CX Embedded PC Systems series. Designed for DIN rail installation next to I/O terminals, the unit combines the CPU, memory, fieldbus, and supply modules in one enclosure. It executes PLC logic, visualization, and gateway tasks so that distributed machines can be connected to higher-level networks without a full panel PC.
The controller is driven by an ARM9 processor clocked at 400 MHz, and it includes 64 MB of RAM to host the real-time operating system and user program. Application data and system files are stored on a removable 512 MB microSD card, while a dedicated 1 MB UPS buffer preserves variables during short power failures. Network access is provided by a single RJ45 port that supports 10/100 Mbit/s Ethernet for TCP/IP-based configuration or Modbus services. For deterministic machine communication, the built-in fieldbus interface operates as an EtherCAT slave, allowing it to connect to an upstream master with cycle times in the microsecond range. The control electronics operate from a 24 VDC supply. A 500 V dielectric barrier separates the incoming supply lines from the low-voltage logic domain. The IP20 enclosure is finger-safe and intended for installation in a protected cabinet.
Continuous logic and I/O circuits draw up to 10 W from the bus, while the device itself has a peak power consumption of 3 W, leaving reserve capacity for attached terminals. The plastic housing measures 64 mm in width, 73 mm in depth, and 100 mm in height, enabling dense side-by-side mounting without forced ventilation. An I/O supply rail rated for 2 A is routed through spring terminals to downstream modules, allowing the embedded PC to feed several digital channels directly. The unit has a mass of 180 g, which minimizes mechanical stress on the DIN rail when the installation is subjected to vibration.
Technical Specifications
Bus Power
10 W
Depth
73 mm
Dielectric Strength
500 V
Ethernet Interface
1 x RJ45, 10/100 Mbit/s
Fieldbus Interface
EtherCAT Slave
Flash Memory
512 MB microSD
Height
100 mm
I/o Supply Current
2 A
Main Memory
64 MB RAM
Max Power
3 W
Power Supply
24 VDC
Processor
Arm9, 400 MHz
Protection Rating
IP20
Ups Buffer
1 MB on microSD
Weight
180 g
Width
64 mm
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







