CX5140-0143 by Beckhoff
Get a Quote for CX5140-0143
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The CX5140-0143 is an embedded PC module manufactured by Beckhoff and supplied in the CX Embedded PC Systems series. Designed for DIN-rail installation, the unit functions as the central controller for small and midsize machines by executing PLC code, interpolating axes, and hosting operator interfaces. Its role in industrial automation is to combine controller performance and open-standard communication in a single, space-saving platform.
Computation is handled by an Intel Atom E3845 1.91 GHz processor whose four cores support deterministic multitasking under the preinstalled Windows 10 IoT Enterprise 2016 LTSB 32-bit operating system. A 4 GB DDR3 RAM bank stores executable code and real-time variables, while program data can be retained on cards installed in the CFast and MicroSD slots. For networking, two RJ45 interfaces supporting 10/100/1000 Mbit/s accommodate machine, supervisory, and cloud traffic. Local peripherals connect through four USB 2.0 Type A ports rated at 500 mA, enabling barcode readers or service drives to draw power directly from the controller. The unit runs Beckhoff TwinCAT 2 NC I Runtime, allowing G-code motion tasks to operate alongside PLC logic. Its internal graphics engine can operate at up to 792 MHz and uses 256 MB of shared memory, providing basic HMI visualization without an external graphics card.
Control cabinet integration is supported by the 24 V DC power supply requirement. The unit typically draws 16 W and can draw up to 23 W when an internal UPS module is active. Signal isolation withstands a dielectric strength of 500 V between the supply and system ground. The aluminum housing measures 142 × 100 × 92 mm, allowing it to fit next to standard terminal blocks on a TS35 rail. An ingress protection rating of IP20 makes the unit suitable for clean indoor panels with adequate airflow.
Technical Specifications
Control Software
TwinCAT 2 NC I Runtime
Dielectric Strength
500 V
Dimensions (w X H X D)
142 x 100 x 92 mm
Ethernet Ports
2 x RJ45, 10/100/1000 Mbit/s
Flash Memory
CFast Slot + MicroSD Slot
Graphics Burst Clock
792 MHz
Graphics Memory
256 MB (shared)
Main Memory
4 GB DDR3-RAM
Max Power Consumption
16 W
Max Power With Ups
23 W
Number Of Cores
4
Operating System
Windows 10 IoT Enterprise 2016 LTSB 32-bit
Power Supply
24 V DC
Processor
Intel Atom E3845 1.91 GHz
Protection Rating
IP20
Usb Ports
4 x USB 2.0, 500 mA, Type A
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







