CX5130-0112 by Beckhoff
Get a Quote for CX5130-0112
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The CX5130-0112 is an embedded PC produced by Beckhoff within the CX Embedded PC Systems series. Intended for DIN-rail installation alongside EtherCAT or Bus Terminals, it combines controller, communication, and visualization functions so a single device can run PLC logic, motion control, and a local HMI in industrial automation cells. Running TwinCAT software on a Windows platform, the unit provides deterministic task execution while remaining compatible with standard IT tools, allowing it to connect plant-floor signals with higher-level data processing systems.
Processing performance comes from an Intel Atom E3827 system-on-chip configured with two cores clocked at 1.75 GHz; this dual-core arrangement enables separate real-time and background threads without contention. The controller carries 4 GB DDR3 RAM, providing volatile memory for sizable TwinCAT projects and transient process data. Two Ethernet controllers connect through two RJ45 jacks, and their line rate of 10/100/1000 Mbit/s supports EtherCAT communication and standard TCP/IP traffic. Graphics tasks are handled by an integrated engine with 256 MB of dedicated memory that can drive a DVI-I monitor at resolutions up to 1920 × 1200 pixels. This capability allows a local operator panel to run without a separate PC. Four USB 2.0 ports accommodate storage devices, barcode readers, or backup drives, while the internal CFast slot hosts the solid-state system volume.
Electrical integration relies on a 24 V DC supply, and the unit consumes up to 14 W under maximum load. The IP20 housing protects internal components against accidental contact and solid objects larger than 12.5 mm. Electrical isolation withstands 500 V between the supply and signal lines. Power contacts on the terminal bus can carry 10 A, while the logic side supplies 2 A to attached I/O terminals. A 1 MB UPS buffer on the CFast card secures the most recent process image during a sudden power outage. The cast-aluminum housing measures 142 × 100 × 92 mm and weighs 1,095 g, allowing it to fit alongside standard Beckhoff terminal assemblies.
Technical Specifications
Core Count
2
Cpu Frequency
1.75 GHz
Depth
92 mm
Dielectric Strength
500 V
Dimensions (w X H X D)
142 x 100 x 92 mm
Dvi-i Max Resolution
1920 x 1200
Graphics Memory
256 MB
Height
100 mm
I/o Terminal Supply
2 A
Lan Ports
2 x RJ45
Lan Speed
10/100/1000 Mbit/s
Main Memory
4 GB DDR3-RAM
Max Power
14 W
Max Power Consumption
14 W
Number Of Cores
2
Power Contacts Load
10 A
Power Supply
24 V DC
Processor
Intel Atom E3827
Protection Rating
IP20
Ups Buffer
1 MB On CFast Card
Usb Ports
4 x USB 2.0
Weight
1095 g
Width
142 mm
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







