CX5120-0122 by Beckhoff

Rated 4.9 stars (20 reviews)

Get a Quote for CX5120-0122

Request a quote or call us now at 1-888-551-3082!

In-Stock, Ships 3-5 Days

We respect your privacy. Your information is safe and will never be shared.

Secure Online
Checkout

Free Ground
Shipping

One Year
Warranty

The CX5120-0122 is an embedded PC produced by Beckhoff within the CX Embedded PC Systems series. Intended for DIN-rail installation, it serves as a compact PLC and motion controller that can drive distributed I/O and HMI stations in industrial automation cells. When equipped with TwinCAT 2 NC PTP Runtime, the device executes synchronized point-to-point axis control alongside standard IEC 61131-3 task scheduling.

An Intel Atom E3815 processor operates at 1.46 GHz and is supported by 2 GB DDR3-RAM, giving the controller headroom for cyclic logic, trajectory generation, and local data buffering. Graphics output relies on 256 MB of dedicated video memory connected to integrated Intel HD Graphics, so modest visualizations can run directly on a panel PC without a discrete GPU. Removable-media and service access are available through 4 × USB 2.0 interfaces that supply up to 500 mA per port. Two Ethernet adapters, presented as 2 × RJ45, support switched or redundant network topologies at 10/100/1000 Mbit/s for deterministic EtherCAT or standard TCP/IP traffic. The 11-pin system connector delivers up to 2 A for attached I/O terminals, allowing local expansion without auxiliary supplies.

The controller's power budget is capped at 11 W, drawn from a nominal 24 V DC source that can be paralleled for redundancy. Overall housing dimensions are 122 × 100 × 92 mm, so it fits into shallow control panels while still meeting a dielectric strength of 500 V between power circuits and protective earth. A single-core architecture minimizes heat, and internal bus couplers pass 2 A continuously to slice I/O modules. USB outputs are current-limited to 500 mA, protecting flash drives and diagnostic adapters from inrush faults. Component spacing and a metal chassis help the unit withstand conducted disturbances and radiated noise commonly present in factory environments.

Technical Specifications

Control Software
TwinCAT 2 NC PTP Runtime

Cpu Cores
1

Dielectric Strength
500 V

Dimensions (W x H x D)
122 x 100 x 92 mm

Graphics Memory
256 MB

I/o Terminal Current
2 A

Lan Ports
2 x RJ45

Lan Speed
10/100/1000 Mbit/s

Main Memory
2 GB DDR3-RAM

Max Power Use
11 W

Power Supply
24 V DC

processor
Intel Atom E3815, 1.46 GHz

Processor Graphics
Intel HD Graphics

Usb Current
500 mA

Usb Ports
4 x USB 2.0

Click here for product datasheet

Contact Us

1620 Old Apex Road, Cary, NC 27513, USA

Toll Free: 1-888-551-3082

International: 1-919-443-0207

Fax: 1-919-867-6204

Email: sales@wakeindustrial.com

Shipping Options

DHLFedExUPSFreight

Payment Methods

American ExpressMasterCardVisaWire Transfer

Need Assistance?

Our team is here to help you find the right part for your needs.

Worldwide Shipping with FedEx and UPS.

We accept all major credit cards

1 year Automation Factory warranty on ALL products