CX5020-0122 by Beckhoff
Get a Quote for CX5020-0122
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The CX5020-0122 is an embedded PC controller manufactured by Beckhoff as part of the CX Embedded PC Systems series. Designed for DIN-rail mounting beside I/O terminals, the module integrates x86 computing power, fieldbus interfaces, and real-time operating software into a compact unit. In an automation cell, it replaces a conventional PLC and industrial PC combination, coordinating motion axes, processing sensor data, and forwarding status information to higher-level supervisory networks.
Processing tasks are handled by an Intel Atom Z530, a single-core embedded CPU optimized for low heat dissipation. Its clock frequency of 1.6 GHz provides suitable cycle times for typical PLC logic and HMI tasks. The system electronics draw from a control cabinet supply of 24 V DC, and the maximum internal power loss is limited to 12.5 W, which eases enclosure cooling requirements. Four host connectors follow the USB 2.0 interface standard, enabling local connection of scanners, memory drives, or service computers. Two switched Ethernet ports create a simple line topology for EtherCAT or standard TCP/IP devices without an external switch.
The preinstalled TwinCAT 2 NC-PTP Runtime supplies deterministic task scheduling and coordinated point-to-point motion control. A CompactFlash slot carries at least 2 GB of nonvolatile storage for recipes and system images, allowing the stored software to be maintained without replacing the controller. Electrical isolation is reinforced by a dielectric strength of 500 Veff between the internal supply and grounded housing. Up to 2 A of 5 V auxiliary current can be routed through the backplane to power adjacent digital and analog I/O slices. With a width of 106 mm, a depth of 92 mm, and a height of 100 mm, the unit fits shallow control panels. Its DVI-D port supports a direct connection to an industrial monitor for on-machine visualization.
Technical Specifications
Control Software
TwinCAT 2 NC-PTP Runtime
Cpu Clock
1.6 GHz
Depth
92 mm
Dielectric Strength
500 Veff
Ethernet Ports
2
Height
100 mm
I/o Current Supply
2 A
Max. Power Loss
12.5 W
Min. Cf Capacity
2 GB
Power Supply
24 V DC
Processor
Intel Atom Z530
Usb Ports
4
Usb Standard
USB 2.0
Video Output
DVI-D
Width
106 mm
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







