CX2030-0111 by Beckhoff
Get a Quote for CX2030-0111
Request a quote or call us now at 1-888-551-3082!
We respect your privacy. Your information is safe and will never be shared.
Secure Online
Checkout
Free Ground
Shipping
One Year
Warranty
The CX2030-0111 is an embedded PC module produced by Beckhoff within the CX Embedded PC Systems series. It acts as the central control element in distributed automation. The module runs user logic and motion tasks through the preinstalled TwinCAT 2 PLC Runtime while interfacing directly with EtherCAT or other fieldbus I/O terminals.
This unit employs an Intel Core i7-2610UE dual-core processor clocked at 1.5 GHz; the two physical cores allow deterministic multitasking among HMI, PLC, and communication processes. System responsiveness is supported by 2 GB DDR3 RAM, which provides space for variables, visualization data, and real-time logs. Integrated Intel HD Graphics 3000 drives the DVI-I interface at resolutions up to 1920 × 1200, enabling a local display connection without an external graphics card. Local nonvolatile storage for cyclic data is handled by NOVRAM, while program and operating code remain in solid-state flash storage. Power consumption stays below 27 W, so the fanless aluminum housing can dissipate heat by convection inside standard control cabinets.
A regulated input of 24 V DC powers the logic section, and the internal circuitry has a dielectric strength of 500 V for protection against transient line spikes. The assembly carries an IP20 rating for use in protected cabinet environments and measures 144 × 99 × 91 mm to conserve DIN-rail space. Persistent process counters remain available after power interruptions through a dedicated 128 kB NOVRAM segment. External connectivity includes two Gigabit Ethernet ports with RJ45 connectors, four USB 2.0 ports that can each supply 500 mA, and a DVI-I socket for local visualization. The Ethernet interfaces incorporate magnetic isolation, while the printed circuit board maintains appropriate creepage distances between internal circuits. These clearances help separate the low-voltage controller electronics from higher-voltage wiring installed nearby in the cabinet.
Technical Specifications
Control Software
TwinCAT 2 PLC Runtime
Core Count
2
Cpu Clock
1.5 GHz
Dielectric Strength
500 V
Dimensions (W x H x D)
144 x 99 x 91 mm
Graphics
Intel HD Graphics 3000
Lan Ports
2 x RJ45, 10/100/1000 Mbit/s
Main Memory
2 GB DDR3 RAM
Max Dvi-i Resolution
1920 x 1200
Max Power Consumption
27 W
Novram
128 kB
Processor
Intel Core i7-2610UE
Protection Rating
IP20
Supply Voltage
24 V DC
Usb Ports
4 x USB 2.0, 500 mA each
Contact Us
1620 Old Apex Road, Cary, NC 27513, USA
Toll Free: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204
Email: sales@wakeindustrial.com
Need Assistance?
Our team is here to help you find the right part for your needs.







