CP7832-1138-0010 by Beckhoff

The CP7832-1138-0010 is a panel-mounted industrial computer produced by Beckhoff for the CP Panel PC Systems series. It combines a touch display, motherboard, and I/O in one enclosure, allowing the device to run visualization software, collect machine data, and host fieldbus drivers at the machine front end. By combining PC performance with protection suited for factory environments, the product eliminates the need for a separate cabinet HMI and allows operators to access control functions directly from the production floor.

The housing is sealed to IP65, so dust and water jets cannot reach the electronics or display bezel. Power is supplied by a regulated 24 VDC source that can be shared with other low-voltage controls. Reliable operation is supported at temperatures between 0 °C and 55 °C, while the allowable relative humidity reaches 95% without condensation. The unit withstands shocks up to 5 G for 11 ms half-sine pulses. It also tolerates vibration amplitudes of 0.035 mm from 10 to 58 Hz and acceleration of 0.5 G from 58 to 500 Hz, allowing operation near stamping presses or high-speed packaging machines. Storage temperatures range from -20 °C to 65 °C, permitting the unit to be stored in unconditioned facilities when it is not in use.

A 19-pin M16 connector carries the digital video signal provided through a DVI-D interface, enabling direct connections to remote monitors or KVM extenders. One front-accessible USB 1.1 port uses a 5-pin M9 receptacle and supports data transfer rates up to 12 Mbps for compatible peripherals or memory devices. The incoming power connection uses a threaded 4-pin M12 connector that helps prevent accidental disconnection during machine operation. These interfaces provide secure connections for power, video output, and front-panel USB access in industrial installations.