CP7223-0002-0000 by Beckhoff

The CP7223-0002-0000 is a Panel PC manufactured by Beckhoff in the CP Panel PC Systems series. The unit combines a touch display, an x86 processing board, and field-level connectors in a single enclosure for machine supervision, data acquisition, and on-device control tasks. By hosting the human-machine interface and real-time software locally, it shortens signal paths between sensors, actuators, and the operator, simplifying cabinet design and reducing latency in automated production cells.

The sealed front panel has an IP65 rating, so dust and low-pressure water jets cannot enter the electronics. The computer runs from a 24 VDC supply delivered through 1.5 mm² power leads, while a dedicated 4 mm² ground conductor diverts fault current. Internally, a 3.5-inch motherboard holds industrial-temperature components and accepts high-speed DDR4 memory. Mass storage is provided by a 2.5-inch hard disk or SSD bay that supports hot-swapping during field service. Network access is handled by one Gigabit controller connected to an RJ45 push-pull jack. The port supports a single Ethernet segment up to 100 m, allowing the panel to be mounted far from a switch without repeaters. This basic Ethernet channel can carry PLC communications, camera streams, or remote diagnostic data.

Hardware security is provided by an activated fTPM 2.0 module that stores cryptographic keys for signed boot processes and file encryption. The unit withstands shocks up to 5 G during a 30 ms half-sine pulse, supporting operation in mobile or impact-prone installations. Its continuous vibration tolerance reaches 0.5 G at a displacement of 0.035 mm, allowing the panel to operate on presses, conveyors, and machining centers without data errors or connector fatigue. These resistance levels help protect storage devices, internal circuit boards, and external connections from the mechanical forces commonly present around moving industrial equipment.