cp7202-1010-0010 by Beckhoff

The cp7202-1010-0010 is an industrial panel PC from Beckhoff within the CP Panel PC Systems series. It combines display, computing, and control functions in one sealed unit, allowing it to run HMI software, local PLC tasks, or edge-level data processing directly on the machine floor in automated plants. The integrated design reduces the need for separate computing hardware near the operator interface and supports installation in space-constrained machinery. An fTPM 2.0 secure element handles cryptographic key storage for signed software and protected TLS connections.

A single Ethernet interface with an RJ45 Push-Pull connector links the panel to control networks and supports installations that use centralized switching. The copper segment can extend up to 100 m before repeaters are required, matching standard Cat 5e limits. System memory uses DDR4 RAM, providing the bandwidth and low latency needed for control applications and responsive visualization. All components mount on a 3.5-inch embedded motherboard, a compact form factor that reduces enclosure depth. The housing carries an IP65 rating, keeping dust and water jets away from the electronics when the front panel is installed in a cabinet door or support arm. Power is supplied through a 24 VDC supply rail, making the panel compatible with common control-cabinet power systems.

The chassis withstands shocks of 5 G for 30 ms without data loss, while vibration limits of 10-58 Hz at 0.035 mm and 58-500 Hz at 0.5 g permit installation on moving gantries. One internal bay accepts a 2.5-inch HDD or SSD, providing a choice between rotational media and solid-state storage. The chassis does not include a second physical drive slot, which reduces internal space requirements and heat accumulation. For wider panels that draw more backlight current, an input range of 22-30 VDC accommodates normal bus-voltage fluctuations. The permitted operating temperature ranges from 0 °C to +45 °C, supporting use in typical industrial control areas. Storage is permitted at temperatures down to -20 °C, protecting the unit during transportation and warehouse storage.