CP6932-0001-0000 by Beckhoff

The CP6932-0001-0000 is a panel-mount industrial computer developed by Beckhoff within the CP Panel PC Systems series. As a compact HMI and control node, the unit combines touchscreen visualization with PC-based control logic, allowing display, supervisory, and motion tasks to operate from a single enclosure on the production line. The front panel employs TFT display technology that delivers consistent brightness and color across wide viewing angles.

A sealed aluminum bezel and membrane keys give the front an IP65 protection rating, so it tolerates water jets and airborne dust when mounted in a cabinet door. The internal electronics draw power from a nominal 24 VDC supply, simplifying wiring from standard control power buses. For high-current startup events, the five-pin power plug is approved for 16 A, helping prevent nuisance trips caused by capacitive inrush. Communication with graphics sources is managed by the digital display channel controller. Its maximum DDC handshake rate of 50 kHz supports timely EDID transfers between the panel and host PC for correct resolution settings.

Video input arrives through a DVI Extended interface, and Beckhoff CP Link cabling can carry the signal up to 50 m without degradation, allowing the computer section to be installed remotely in a protected rack. The ventilated sheet-steel rear housing has an IP20 ingress protection rating, making it suitable for clean control cabinets. One USB extension receptacle is provided on the front, while the rear offers two standard ports with USB-A connectors. All ports support USB 2.0 data rates for peripherals such as keyboards, mice, and service memory sticks. Field wiring lands on spring terminals that accept conductors up to 1.5 mm², supporting secure supply and protective earth connections.